Description
If you run a Hornady Cam-Lock Bullet Puller and reload .30 caliber rifle rounds, the #7 collet is the piece that does the actual gripping. It's sized for .308 and .312 diameter projectiles, which covers a huge chunk of the rifle world: .308 Winchester, .30-06, .300 Blackout, 7.62×51, 7.62x54R and plenty of other .30 cal cartridges. The collet clamps onto the bullet just above the case neck, and with the cam-lock mechanism doing the heavy lifting, bullets come out quick and clean.
What the #7 Cam-Lock Collet Does
Unlike an inertia (hammer) puller where you're whacking a handle over and over and risking a mess of spilled powder, the Cam-Lock system pulls bullets right on your single-stage press. The #7 collet threads into the puller body, you cam it down to clamp the bullet, and raise the ram to extract it. Reloaders who've switched over consistently point out how much faster and cleaner it is than the hammer method, with no powder flying around the bench.
Why Reloaders Keep a #7 Collet Around
Pulling bullets is just part of the hobby. Whether you're salvaging good brass from a bad batch, correcting an overcharge or seating depth mistake, or breaking down surplus ammo to rework the components, a bullet puller saves you money and material. The nice thing about the Cam-Lock design is that it pulls the bullet without chewing it up, so in a lot of cases you can reseat and reuse the projectile. Folks who load across several calibers tend to keep a small collection of collets on hand, and the #7 is one of the most useful ones to own given how many .30 cal cartridges it handles.
Keep in mind this listing is for the collet only. You'll need the Hornady Cam-Lock Bullet Puller body to use it, since that's the part that provides the actual pulling mechanism.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 392160
- UPC: 090255921601
- Model: Cam-Lock
- Collet Number: #7
- Caliber: .308/.312 (.308 Winchester / 7.62x51mm)
- Product Type: Bullet Puller Collet
- Compatible With: Hornady Cam-Lock Bullet Puller
- Color: Silver
- Weight: 0.8 oz
- Quantity: 1
- Ammunition Type: Rifle
What’s Included
- 1 Hornady Cam-Lock Bullet Collet #7 (.308/.312 Cal)
Frequently Asked Questions
Does the Cam-Lock Bullet Collet #7 come with the bullet puller?
No, this listing is for the #7 collet only. You'll need the Hornady Cam-Lock Bullet Puller body separately, which provides the actual pulling mechanism. The collet threads into that body to clamp onto your bullets.
What calibers does the #7 collet work with?
The #7 is sized for .308 and .312 diameter bullets, so it covers a wide range of .30 caliber rifle cartridges. That includes popular rounds like .308 Winchester, .30-06, .300 Blackout, 7.62×51 and 7.62x54R. It's intended for rifle cartridges only.
Will the Cam-Lock collet damage my bullets when pulling them?
The cam-lock design is made to grip the bullet firmly without marring it, so in most cases you can reuse the projectile. Reloaders note it may take a pull or two to dial in the right tension when you first set it up. Once adjusted, it extracts bullets cleanly without spilling powder.
Why use a Cam-Lock collet instead of an inertia hammer puller?
The Cam-Lock system works right on your reloading press, so you cam down on the bullet and raise the ram to pull it, rather than repeatedly striking a handle. It's faster, quieter, and keeps powder from flying around your bench. Many reloaders consider it a big upgrade over the hammer method.




Reviews
There are no reviews yet.