Description
Every reloader eventually loads something wrong. Too much powder, a seated depth that's off, or a bullet you want to swap out. The Hornady Cam-Lock Bullet Collet #2 is the part of the Cam-Lock system that grabs onto .224 diameter bullets so you can pull them with your press instead of smacking an inertia hammer against the floor two hundred times. It's a caliber-specific collet made for .223 Rem and 5.56 NATO, and it threads right into the Cam-Lock Bullet Puller body.
How the Collet #2 Fits Into the Cam-Lock System
This is the collet, not the complete puller. You'll need the Hornady Cam-Lock Bullet Puller (item 050095) to use it, since the collet is the clamping insert that does the actual gripping. Drop the loaded round into the shellholder, run the ram up so the bullet enters the collet, then cam the handle to lock the jaws around the bullet and pull. The round comes apart clean, with the powder and bullet ready for reuse. Folks who've made the switch from an inertia puller tend to leave that old hammer in the toolbox for good once they feel how much faster this is on volume.
Picking the Right Size for .22 Caliber
Hornady numbers its collets by bullet diameter, and the #2 covers the .224 bullets used in .223 Rem and 5.56 NATO loads. If you're running other calibers, you'll want the matching collet number for those diameters, since each one is sized specifically to grip without slipping. The jaws hold snug on the bullet and release clean, though very tight-seated rounds may show faint marks. A common trick is to bump the bullet slightly deeper with a seating die first to break the crimp seal, which lets the collet do its work with less pressure.
Built With Hornady Reloading Quality
This collet is made in the USA and carries the same build quality reloaders expect from Hornady gear. It's a simple, durable piece that earns its keep every time you need to tear down a batch and recover your components. For anyone loading .223 or 5.56 in any kind of quantity, it's one of those small tools that saves a surprising amount of time and frustration.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 392155
- UPC: 090255921557
- Collet Number: #2
- Caliber: .223 Rem / 5.56 NATO (.22 Caliber)
- Bullet Diameter: .224
- Fits: Hornady Cam-Lock Bullet Puller (Item 050095)
- Intended Use: Rifle cartridges only
- Country of Origin: United States
- Quantity: 1 collet
What’s Included
- One (1) Hornady Cam-Lock Bullet Puller Collet #2 for .22 caliber (.223/5.56)
Frequently Asked Questions
Does the Cam-Lock Collet #2 come with the bullet puller?
No, the collet is sold on its own. It's the clamping insert only, and you'll need the Hornady Cam-Lock Bullet Puller (item 050095) to use it. The collet threads into that puller body to grip and pull bullets with your reloading press.
What calibers does the #2 collet work with?
The #2 is sized for .224 diameter bullets, which covers .223 Rem and 5.56 NATO. It also works for other .22 caliber rifle rounds that use .224 projectiles, such as .22 TCM. For different bullet diameters, you'll want the matching collet number.
Will the collet mark or damage my bullets?
Most of the time it pulls bullets clean with no scraping or deformation. On rounds that are seated or crimped very tight, you may see minor marks. A handy fix is to seat the bullet slightly deeper first to break the crimp, which lets you pull with less clamping pressure.
Can I use this collet for pistol cartridges?
No, Hornady specifies the Cam-Lock system for rifle cartridges only. If you need to pull pistol rounds, the Hornady L-N-L Impact Bullet Puller is the tool designed for that job.





Reviews
There are no reviews yet.