0
0

Hornady Cam Lock Trimmer Cutter – Replacement Tool Steel Cutting Head 390972

UPC: 090255909722

$21.99

14 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run a Hornady Cam Lock Case Trimmer, this is the exact part that does the actual cutting work. The Cam Lock Trimmer Cutter (part 390972) is the replaceable cutting head that mounts to your trimmer and shaves fired brass down to proper length. It is machined from ultra-hard tool steel, which is what gives it the edge retention to churn through hundreds of cases before you ever think about swapping it out. This is a genuine Hornady factory part, not an aftermarket copy, so it drops right into the trimmer it was built for with no fuss.

What the Cam Lock Trimmer Cutter Does on the Bench

The cutter is the large-diameter head on the Hornady Cam Lock Trimmer that trims case mouths square and true. Paired with the trimmer's micro-adjustable spindle, it lets you dial in length in .001 inch increments, and the generous head size means it handles everything from small varmint rounds up through big cases chambered as large as 50 caliber. It works right alongside your Hornady pilots, which center the case mouth for a straight, even cut every single time.

Why Reloaders Keep a Spare Cam Lock Trimmer Cutter Around

Any cutting tool eventually dulls or chips if it meets a bad spot of brass, and the smart move is to have a backup waiting in the drawer rather than stalling a reloading session. Plenty of folks grab one of these to keep on hand so their case prep never grinds to a halt. Since it is the factory steel cutter, you get the same clean performance that came with your trimmer out of the box.

Fitment for the Cam Lock Trimmer Cutter

This cutter is designed specifically for the Hornady Cam Lock Case Trimmer (item 050140) and serves as the standard and spare cutting head for that unit. If you own that trimmer, this is the correct replacement. Made in the USA, it carries the quality you expect from Hornady reloading gear.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 390972
  • UPC: 090255909722
  • Product Type: Replacement Case Trimmer Cutting Head
  • Material: Ultra-hard tool steel
  • Fits: Hornady Cam Lock Case Trimmer (Item 050140)
  • Caliber Range: Trims cases up to 50 caliber
  • Quantity: 1 cutter
  • Country of Origin: Made in the USA
  • Shipping Weight: 0.06 lb

What’s Included

  • Hornady Cam Lock Trimmer Cutter (1 replacement cutting head, part 390972)

Frequently Asked Questions

What does the Hornady Cam Lock Trimmer Cutter fit?

It is the replacement cutting head for the Hornady Cam Lock Case Trimmer, item 050140. If you run that trimmer, this is the correct factory cutter for it. It drops right in using your existing spindle and pilots.

What is the Cam Lock Trimmer Cutter made of?

The cutter is machined from ultra-hard tool steel, which is what gives it the durability to trim hundreds of cases while holding a clean edge. That same hardness is why reloaders trust it for consistent, square cuts. It is a genuine Hornady factory part.

How large of a case can this cutter trim?

Thanks to its large diameter cutting head, it handles brass all the way up to 50 caliber. That covers the vast majority of rifle and pistol cases you would run through the Cam Lock Trimmer. You just pair it with the correct Hornady pilot for your case neck.

Why would I buy a replacement Cam Lock Trimmer Cutter?

Cutters eventually dull or can chip on a rough case, and a spare means your reloading session never gets interrupted. Many reloaders keep one in the drawer as a backup so they can swap in a fresh edge the moment the original stops cutting cleanly. It restores your trimmer to like-new cutting performance.

Additional information

UPC

090255909722

Manufacturer

Manufacturer Part Number

390972

Shipping Weight

0.06

Reviews

There are no reviews yet.

Be the first to review “Hornady Cam Lock Trimmer Cutter – Replacement Tool Steel Cutting Head 390972”