0
0

Hornady Lock-N-Load .300 AAC Blackout Cartridge Gauge

UPC: 090255807141

$22.99

44 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading .300 AAC Blackout, you already know this little cartridge can be finicky. A lot of folks neck down 5.56 brass to make Blackout cases, and that short shoulder leaves plenty of room for things to go sideways. This Hornady Lock-N-Load gauge gives you a fast, reliable way to catch problems before they turn into a jam or a failure to chamber in the field.

The idea is simple. You drop a sized case or a loaded round into the gauge, and the machined steel pocket tells you whether the dimensions fall inside SAAMI chamber specs. If it seats flush and drops in clean, you're good. If it sits proud or won't go, you've got something to correct, whether that's case length, shoulder bump, or overall length. It checks fit rather than pressure or velocity, so pair it with your calipers and load data for the full picture.

Why the Lock-N-Load Gauge Earns a Spot on the Bench

This thing is built from precision machined steel, so it holds its dimensions and takes years of use without wearing out. There are no moving parts and nothing to adjust, which is exactly what you want in a reference tool. Reloaders who run mixed brass tend to lean on a gauge like this hard, since converted and once-fired cases don't always behave the same way twice.

Getting the Most Out of Your .300 Blackout Cartridge Gauge

Many seasoned .300 Blackout loaders check every single finished round rather than spot-checking every fifth or tenth, and a drop-in gauge makes that practical instead of tedious. It's also handy for dialing in your sizing die: check a case, bump the shoulder, and recheck until it drops in right. A quick pass through the gauge is cheap insurance for your gun and your range day. Hornady has been building reloading gear for decades, and this gauge fits right into that no-nonsense reputation.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number (MPN): 380714
  • UPC: 090255807141
  • Caliber/Gauge: .300 AAC Blackout (7.62x35mm)
  • Bullet Diameter: .308
  • Material: Precision Machined Steel
  • Function: Verifies case and cartridge fit to SAAMI chamber dimensions
  • Color: Silver
  • Made in USA: Yes
  • Shipping Weight: 0.34 lb

What’s Included

  • Hornady Lock-N-Load .300 AAC Blackout Cartridge Gauge (1)

Frequently Asked Questions

What does the Hornady Lock-N-Load .300 Blackout cartridge gauge actually check?

It checks whether a sized case or a loaded round fits within SAAMI chamber dimensions. You drop the case or cartridge into the gauge and read the fit against the reference surfaces. It confirms dimensional fit, not pressure or velocity, so it works alongside your calipers and load data rather than replacing them.

Can I use this gauge for both empty cases and loaded ammo?

Yes. It's useful for checking sized brass before you seat a bullet and for verifying finished rounds before they go in the magazine. Plenty of .300 Blackout loaders use it to set up their sizing die and then recheck once the bullet is seated, since seating can change how a round gauges.

Why is a case gauge worth it for .300 AAC Blackout specifically?

Because a lot of Blackout brass is made by cutting down and reforming 5.56 cases, the short shoulder and variable brass can make rounds that don't chamber right. A gauge catches those before they cause a failure to feed or a stuck case at the range. For a cartridge this prone to fit issues, a quick drop-in check is cheap insurance.

Is the Hornady cartridge gauge adjustable or does it need calibration?

No. It's a one-piece, non-adjustable steel tool machined to a fixed reference, so there's nothing to set up or calibrate. You just drop your case or round in and read the fit, and the steel construction holds its dimensions for years of use.

Additional information

UPC

090255807141

Manufacturer

Manufacturer Part Number

380714

Caliber/Gauge

.300 AAC Blackout

Shipping Weight

0.34

Reviews

There are no reviews yet.

Be the first to review “Hornady Lock-N-Load .300 AAC Blackout Cartridge Gauge”