Description
The Hornady Lock-N-Load Cartridge Gauge is one of those small shop tools that earns its keep the first time it saves you a jam at the range. This particular model is cut for 40 S&W and 10mm Auto, both of which share the .400 bullet diameter, so it handles both calibers off the same gauge. You drop a case or a finished round into the gauge, and if it seats flush and falls out clean, you know it'll fit a SAAMI-spec chamber. Simple, fast, and no guesswork.
Why the Lock-N-Load Cartridge Gauge Belongs on Your Bench
If you're running a progressive press and cranking out 40 S&W or 10mm in volume, a quick gauge check is the easiest way to catch a round that's bulged at the base or sized a hair too long before it finds its way into a mag. It's just as handy for inspecting factory ammo you bought in bulk, or for sorting range brass before you reload it. The gauge checks both loaded and unloaded cartridges, so it covers your whole workflow from brass prep to finished ammo.
Built From Steel for the Long Haul
Hornady machines these gauges from solid steel, so the reference dimensions stay true round after round, year after year. There's nothing to calibrate and nothing to wear out under normal use. It cuts to SAAMI minimum chamber specs, which means a round that passes this gauge is going to feed reliably in a correctly cut chamber.
Hornady has been building reloading gear for over sixty years, and tools like this are a big reason reloaders keep coming back. It's the kind of purchase you make once and then forget you ever reloaded without it. Toss it in your bench drawer or your range bag and you've got a no-fuss way to keep your ammo running clean.
Key Specifications
- Caliber: 40 S&W / 10mm Auto (.400 diameter)
- Material: Steel
- Checks: Loaded and unloaded cartridges against SAAMI chamber specs
- Manufacturer: Hornady
- Manufacturer Part Number: 380704
- UPC: 090255807042
- Origin: Made in the USA
- Quantity: 1 gauge
- Warranty: Hornady lifetime warranty
What’s Included
- Hornady Lock-N-Load Cartridge Gauge (40 S&W / 10mm Auto, .400 diameter)
Frequently Asked Questions
What calibers does this Hornady Lock-N-Load Cartridge Gauge check?
This gauge is cut for 40 S&W and 10mm Auto, which both use the same .400 bullet diameter. That means one gauge covers both cartridges off your bench. It's part number 380704 in Hornady's lineup.
Can I use the cartridge gauge on loaded ammo or just empty brass?
Both. The gauge works for checking sized brass during case prep and for confirming finished rounds will chamber correctly. It's a good way to inspect factory ammo you bought in bulk, too.
How does the Lock-N-Load Cartridge Gauge work?
You simply drop a case or loaded round into the gauge. If it sits flush and drops back out cleanly, it falls within SAAMI minimum chamber dimensions and should feed reliably in a correctly cut chamber. Anything oversized or too long will stand proud and tell you it needs attention.
Is the Hornady cartridge gauge durable?
It's machined from steel, so the reference dimensions hold true over the long haul with nothing to calibrate or wear out under normal use. Hornady backs it with their lifetime warranty. It's the kind of tool you buy once and keep for good.




Reviews
There are no reviews yet.