Description
If you're loading for a 6mm precision rig and chasing tight groups at distance, these Hornady ELD Match bullets are the real deal. This is the 109 grain 6mm (.243 diameter) projectile, sold in a box of 500, with a measured ballistic coefficient of .585 (G1) and .295 (G7) and a sectional density of .264. That high BC is what keeps these bullets bucking the wind and staying supersonic farther downrange, which matters when you're stretching things out past the point where lighter bullets start to wobble.
What Sets the 6mm ELD Match Apart
The headline feature is the Heat Shield tip. Hornady found that conventional polymer tips on sleek, high-BC bullets can soften and deform from aerodynamic heating in flight, which throws off consistency. The Heat Shield material resists that heating and keeps the tip shape uniform, so every bullet in the box leaves the muzzle with the same profile. Paired with the patented DVRT (Drag Variability Reduction Technology) meplat design, you get more uniform drag from one bullet to the next, which translates to less vertical dispersion and smaller groups at longer ranges.
Build Quality Behind the Hornady ELD Match Bullet
Underneath the tip, these run a precision swaged lead core and highly concentric AMP jackets, mated to a streamlined secant ogive and a boat-tail base. That combination is where the accuracy and the class-leading BC come from. Hornady measures and verifies these BCs with Doppler radar and corrects them to standard atmospheric conditions, so the number on the box is grounded in real testing rather than a napkin calculation.
Getting the Most From These 109gr 6mm Bullets
Hornady lists a minimum recommended twist rate of 1-8 inches for this 109 grain bullet, so make sure your barrel is fast enough to stabilize it properly. These are a popular choice for 6mm Creedmoor, 6mm Dasher, 6 GT, and similar competition cartridges where a heavy-for-caliber, high-BC bullet earns its keep in F-Class, PRS, and long-range target shooting. The 500-count box keeps you stocked through plenty of load development and match rounds.
Key Specifications
- Manufacturer: Hornady
- Product Line: ELD Match
- Manufacturer Part Number: 245301
- UPC: 090255727227
- Caliber: 6mm (.243 diameter)
- Bullet Weight: 109 grain
- Bullet Type: Polymer Tip Boat Tail (Heat Shield)
- Ballistic Coefficient (G1): .585
- Ballistic Coefficient (G7): .295
- Sectional Density: .264
- Recommended Twist Rate: 1-8 inch (minimum)
- Bullet Length: 5.5 (reference)
- Quantity: 500 per box
- Application: Target / Match
What’s Included
- 500 Hornady ELD Match 6mm (.243) 109 grain bullets
Frequently Asked Questions
What twist rate do I need for the 109gr Hornady ELD Match 6mm bullet?
Hornady lists a minimum recommended twist rate of 1-8 inches for this 109 grain 6mm bullet. A 1-8 or faster barrel will stabilize it properly. If your twist is slower than that, you may see the bullet fail to stabilize at distance.
What is the ballistic coefficient of this 6mm ELD Match bullet?
This 109 grain 6mm ELD Match carries a G1 BC of .585 and a G7 BC of .295, with a sectional density of .264. Hornady measures and verifies these numbers with Doppler radar and corrects them to standard atmospheric conditions, so the figures reflect real-world testing.
What makes the Heat Shield tip different from a regular polymer tip?
Hornady found that conventional polymer tips on high-BC bullets can soften and deform from aerodynamic heating during flight, which hurts consistency. The Heat Shield tip resists that heating and holds its shape, keeping the meplat uniform bullet to bullet. That consistency is a big part of why these shoot so predictably at long range.
What cartridges are these 6mm ELD Match bullets good for?
These are a go-to for precision 6mm cartridges like 6mm Creedmoor, 6mm Dasher, 6 GT, and similar competition rounds. The heavy-for-caliber weight and high BC make them popular for F-Class, PRS, and general long-range target work. You'll want a barrel with at least a 1-8 twist to run them.





Reviews
There are no reviews yet.