Description
If you're loading your own .45 Long Colt, this Hornady Custom Grade Series II set gives you everything to take brass from resized to ready. It's a three-die kit covering sizing, case mouth expanding, and bullet seating with a built-in crimper, all machined and polished to the smooth internal finish Hornady is known for. The company backs these dies with a guarantee against breaking or wearing out under normal use, so it's a buy-once setup for most reloaders.
What Sets This .45 Colt Die Set Apart
The standout here is the sizing die's titanium nitride coated ring, often called the gold ring. That hard, slick coating lets you resize straight-wall pistol brass without any lubrication, which cuts a messy step out of your loading routine and keeps your cases clean and scratch-free. For a high-volume revolver cartridge like the .45 Colt, skipping lube is a real time saver.
Zip-Spindle and the Elliptical Expander
Hornady's Zip-Spindle design uses light threads cut into the spindle and collet, so you can make fine adjustments by turning it or zip it up and down for bigger moves. No more fighting the spindle lock when you're setting decap depth. The second die is an elliptical expander that flares the case mouth smoothly, reducing friction and case neck stress compared to older ball-style expanders.
Seating, Crimping, and Setup
The seater die handles bullet seating and includes a crimper, so you can dial in a solid roll crimp for heavier .45 Colt loads or a full crimp to keep bullets locked in place under recoil. Sure-Loc lock rings with wrench flats clamp around the die body and hold your settings without the lock screw ever biting into the threads, and the locking retainer spring pops out in seconds when it's time to clean. Everything arrives in a compartmentalized storage box that keeps your dies, shell holder, and bushings organized on the bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546582
- UPC: 090255565829
- Model: Custom Grade Series II
- Caliber: .45 Long Colt (.452)
- Product Type: 3-Die Set
- Dies Included: Sizer, Expander, Seater
- Sizing Die: Titanium Nitride Coated Ring
- Crimp Type: Roll / Full Crimp
- Thread: 7/8"-14
- Spindle: Zip-Spindle Design
- Lock Rings: Sure-Loc with Wrench Flats
- Length: 7.55 in
- Shipping Weight: 1.75 lbs
What’s Included
- Full-Length Sizing Die with titanium nitride ring
- Elliptical Expander Die
- Bullet Seater Die with built-in crimper
- Sure-Loc lock rings with wrench flats
- Allen wrench for lock rings
- Headed decap pins and spindle lock
- Compartmentalized die storage box
Frequently Asked Questions
Do I need case lube with this .45 Long Colt die set?
No. The sizing die uses a titanium nitride coated ring, so you can resize your straight-wall .45 Colt brass without any lubrication. That slick coating also helps keep your cases from getting scratched up during sizing.
Can this set roll crimp .45 Colt revolver loads?
Yes. The seater die has a built-in crimper that will put a proper roll crimp on your cases, which is what you want for heavier .45 Colt loads in a revolver. You can also run a full crimp to keep bullets seated tight under recoil.
What exactly comes in the Hornady Series II .45 Colt set?
It's a three-die kit with a full-length sizing die, an elliptical expander die, and a bullet seating die with a crimper. You also get Sure-Loc lock rings with wrench flats, an Allen wrench, decap pins, and a compartmentalized storage box to keep everything organized.
Will these dies work on a standard reloading press?
Yes. The dies use the common 7/8"-14 thread, so they'll thread right into any standard single-stage or progressive press. You'll just need the correct shell holder for .45 Colt, which is sold separately.





Reviews
There are no reviews yet.