Description
If you load 7mm Remington Magnum, this Hornady Custom Grade Series I set covers the two jobs that matter most: sizing your brass back to spec and seating bullets where you want them. It's a straightforward two-die package built around Hornady's Series I lineup, which focuses on the popular bottleneck rifle cartridges. You get a full-length sizing die and a bullet seater die, both machined to the same standard Hornady runs across its Custom Grade line.
What the Hornady Series I 7mm Rem Mag Dies Bring to the Bench
The full-length sizer uses Hornady's Zip Spindle design, which puts light threads on both the spindle and the collet so you can dial in incremental adjustments by turning it, or loosen and "zip" it up or down for bigger moves. That locking spindle eliminates slippage, so your decapping stem stays put instead of creeping on you mid-session. The threaded, replaceable expander assembly runs an elliptical expander that smooths out neck sizing, cutting down on friction and case neck stretch compared to a standard ball-type setup. A hardened steel decapping pin handles depriming without bending or breaking, even on crimped primer pockets.
Fit, Finish, and Everyday Use of the 546326 Die Set
The internal die profile is precision machined and polished to a smooth finish, which is a big deal when you're running a lot of magnum brass. That polished interior helps cases glide through without sticking or scuffing, and it's part of why these hold up over the long haul. The seater die uses a simple adjustment screw to set bullet seating depth, and the locking retainer spring pulls out in seconds when it's time to break things down for cleaning.
Hornady backs the Custom Grade line with a no-break, no-wear guarantee under normal use, so this is a set you buy once and keep running. The dies come in Hornady's compartmentalized storage box. One thing worth knowing up front: a shell holder is not included, so you'll want to grab the correct one for your press if you don't already have it.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546326
- Model: Custom Grade Series I
- UPC: 090255563269
- Caliber: 7mm Remington Magnum
- Bullet Diameter: .284
- Die Type: Full Length Sizing / Bullet Seating
- Dies in Set: 2
- Gun Type: Rifle
- Material: Steel
- Spindle Design: Zip Spindle
- Expander: Elliptical, threaded replaceable assembly
- Shipping Weight: 1.4 lbs
What’s Included
- Full-length sizing die
- Bullet seater die
- Hardened steel decapping pin
- Elliptical expander assembly
- Compartmentalized storage box
Frequently Asked Questions
Does this Hornady 7mm Rem Mag die set come with a shell holder?
No, a shell holder is not included with this set. You'll need to match the correct shell holder to the 7mm Remington Magnum case head and your press. It's an easy add-on and most reloaders already have a few on hand.
What dies are in the Series I 2-die set?
The set includes a full-length sizing die and a bullet seater die. The sizer resizes and deprimes your brass in one pass, while the seater sets your bullet to the depth you want. That combination handles the core steps for loading bottleneck rifle cartridges like the 7mm Rem Mag.
What is the Zip Spindle design on the sizing die?
Hornady's Zip Spindle uses light threads on both the spindle and the collet so it locks positively and won't slip during use. You can make fine adjustments by turning the spindle, or loosen it and slide it up or down quickly for larger changes. It makes setup faster and keeps your decapping stem from creeping.
Will these dies work in a standard reloading press?
Yes. These are standard 7/8-14 threaded dies that fit single-stage and most progressive presses. As long as your press takes common threaded rifle dies, this set will thread right in.





Reviews
There are no reviews yet.