0
0

Hornady Series I Custom Grade 2-Die Set .222 Rem (546224)

UPC: 090255562248

$49.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .222 Remington is one of the smoothest, most accurate little varmint rounds out there, and this Hornady Series I Custom Grade set gives you everything you need to load it right at the bench. It's a classic two-die arrangement: a full-length sizing die and a bullet seating die, both machined and hand-polished to that mirror finish Hornady is known for. The interior is polished smooth enough that it won't scratch your brass, which matters when you're trying to get the most life out of your .222 cases.

What the Hornady Series I Sizing Die Brings to the Bench

The full-length size die resizes your fired brass back to spec and handles depriming in one stroke. It uses Hornady's Zip Spindle setup, which has a series of fine threads cut on the spindle and collet so you can make small decapping adjustments by turning it, or zip it up and down quickly for bigger moves. The hardened steel decapping pin won't bend or snap, even when you're punching out crimped primer pockets. Inside you'll find the elliptical expander, a step up from old-school ball expanders that gives you smoother neck sizing with less friction and less case neck stretch.

Dialing In the .222 Rem Seating Die

The seating die has a floating bullet alignment sleeve that pre-centers the bullet and case neck as they enter the die, which helps keep your rounds concentric and consistent downrange. There's a seater adjustment screw for setting your depth, and the die includes a built-in roll crimp if you want to lock bullets in without buying a separate crimp die. Both dies use Hornady's Sure-Loc lock rings that clamp around the body with wrench flats, so you can snug them down without pliers chewing up the threads.

The whole set lives in a stackable, compartmented storage box that holds your dies and leaves room for a shell holder and bushings. Just keep in mind a shell holder is sized separately depending on your press setup. It's a straightforward, dependable set for anyone running a .222 and wanting match-quality loads without overcomplicating things.

Key Specifications

  • Caliber: .222 Remington
  • Bullet Diameter: .224
  • Set Type: Series I Custom Grade, Two-Die
  • Dies Included: Full-Length Sizing Die, Bullet Seating Die
  • Spindle: Zip Spindle decapping assembly
  • Expander: Elliptical expander
  • Lock Rings: Sure-Loc with wrench flats
  • Crimp: Built-in roll crimp in seating die
  • Thread Size: 7/8"-14
  • Construction: Hand-polished steel
  • Shell Holder: Sold separately
  • Manufacturer: Hornady
  • Manufacturer Part Number: 546224
  • UPC: 090255562248
  • Shipping Weight: 1.4 lbs

What’s Included

  • Full-length sizing die with Zip Spindle and elliptical expander
  • Bullet seating die with floating alignment sleeve and built-in roll crimp
  • Two Sure-Loc lock rings
  • Hardened steel decapping pin
  • Compartmented die storage box
  • Instruction sheet

Frequently Asked Questions

Does the Hornady .222 Rem die set include a shell holder?

No, a shell holder is not included with this set. Hornady sells shell holders separately so you can match the right one to your press and cartridge rim. For the .222 Remington you'll want to add the correct shell holder before your first loading session.

Will these dies fit my press?

Yes, these dies use the standard 7/8"-14 thread, which is the industry norm. That means they'll thread right into most single-stage and progressive presses, including Hornady Lock-N-Load and RCBS Rock Chucker setups. If you're running a Hornady Lock-N-Load press, you may want the Lock-N-Load die bushings for quick die changes.

What's the difference between the Zip Spindle and the elliptical expander?

The Zip Spindle is the decapping assembly in the sizing die, with fine threads that let you fine-tune or quickly adjust the decapping pin while locking it down without slippage. The elliptical expander is the part that opens the case neck as the brass is sized. Together they give you smoother sizing and less neck stretch than older ball-expander designs.

Can this set crimp bullets, or do I need a separate crimp die?

The seating die has a built-in roll crimp, so you can crimp and seat in one step if your load calls for it. That saves you from buying a separate crimp die for basic needs. Keep in mind a roll crimp works best with cases trimmed to a consistent length.

Additional information

UPC

090255562248

Manufacturer

Manufacturer Part Number

546224

Shipping Weight

1.4

Reviews

There are no reviews yet.

Be the first to review “Hornady Series I Custom Grade 2-Die Set .222 Rem (546224)”