Description
If you're loading .300 Norma Magnum for long range work, this Hornady Match Grade 2-die set is the kind of tooling that rewards attention to detail. The set pairs a full-length bushing sizing die with a bullet seating die, and the whole point is control. Instead of being locked into one neck diameter, the sizing die uses interchangeable, self-centering neck bushings so you choose exactly how much neck tension your brass sees. That means less overworking of case necks, longer brass life, and more consistent runout from load to load.
What Sets the Match Grade .300 Norma Magnum Dies Apart
The sizing die runs a free-floating spindle and Hornady's elliptical expander, which glides through the neck to cut friction and reduce case-neck stretch compared to a standard ball expander. A knurled spindle lock makes swapping bushings quick when you want to change neck tension, and the replaceable headed decap pin is a nice touch if you ever bend one on a stubborn primer. The bushings themselves come in .001-inch increments, so you can fine-tune tension to match your specific brass and chamber.
Dialing In Loads With the .300 Norma Mag Seating Die
New for 2025, the seating die ships with the Click-Adjust Bullet Seating Micrometer already installed. It measures in .001-inch clicks, which makes repeatable seating depth adjustments simple whether you're chasing the lands or working up a load across different bullet weights. The seating die also includes a roll crimp if your application calls for it. Everything threads 7/8-14 and drops into any standard press.
A Few Things to Know Before You Load
Worth noting up front: the neck bushings are sold separately, so you'll want to pick the right bushing for your brass before you get to the bench. A shellholder is not included either. The set does come with two Sure-Loc rings and a plastic storage box to keep everything organized. It's machined and assembled in the USA, and it's built for handloaders who care about tight groups downrange.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 545169
- UPC: 090255551693
- Model: Match Grade 2-Die Set
- Caliber: .300 Norma Magnum
- Bullet Diameter: .308
- Number of Dies: 2
- Die Types: Full-Length Bushing Sizing Die, Bullet Seating Die with Roll Crimp
- Seating Micrometer: Click-Adjust Bullet Seating Micrometer (factory installed)
- Thread Size: 7/8"-14
- Expander Type: Elliptical Expander
- Bushings Included: No (sold separately)
- Shellholder Included: No (sold separately)
- Country of Origin: USA
What’s Included
- Full-Length Bushing Sizing Die
- Bullet Seating Die with Roll Crimp and factory-installed Click-Adjust Micrometer
- Two Sure-Loc rings
- Plastic storage box
Frequently Asked Questions
Do the neck bushings come with the Hornady Match Grade .300 Norma Magnum die set?
No. The neck sizing bushings are sold separately and are required to complete the sizing die. Hornady offers them in .001-inch increments so you can match the exact neck tension you want for your brass, and the dies will also accept compatible bushings from other makers.
Does the seating die include the Click-Adjust Micrometer?
Yes. For 2025, Hornady ships this seating die with the Click-Adjust Bullet Seating Micrometer already installed from the factory. It adjusts in .001-inch clicks, making it easy to set and return to a precise seating depth.
What threads do these dies use, and will they fit my press?
The dies use standard 7/8-14 threads, so they'll work in any press that accepts standard dies. Keep in mind a shellholder is not included and should be matched to the .300 Norma Magnum case.
What's the advantage of a bushing die over a standard sizing die?
A bushing die lets you control exactly how much the case neck gets sized, which reduces overworking the brass and helps it last longer. That controlled neck tension also tends to improve consistency and concentricity, which shows up as tighter groups at distance.





Reviews
There are no reviews yet.