0
0

Hornady Vernier Ball Micrometer 0-1″ 0.0001″ Case Neck Tool

UPC: 090255500592

$98.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Case neck thickness is one of those details that separates good handloads from great ones, and the Hornady Vernier Ball Micrometer is purpose-built to measure it. Where a standard flat-anvil mic struggles to reach into a case neck, this one pairs a round anvil with a tapered spindle so you can read wall thickness right up to the case shoulder. It covers a 0 to 1 inch range and reads down to 0.0001 inch, giving you the resolution you need to spot uneven necks before they cost you accuracy on paper.

Why the Vernier Ball Micrometer Earns a Spot on Your Bench

Consistent neck walls help the bullet sit centered in the case, which matters when you are chasing tight groups. The ball anvil reaches inside the neck where traditional tools miss, making this micrometer a natural fit for anyone sorting brass, turning necks, or just verifying a batch of once-fired cases. It is equally handy for checking the thickness of other flat stock around the shop.

Features That Keep Your Readings Honest

The ratchet stop delivers uniform measuring pressure every time you close down on a case, which is the key to repeatable numbers run after run. A spindle lock holds your reading in place so the value does not drift when you pull the case away from the tool. The C-frame wears a baked-enamel finish for durability, and the whole thing lives in a plastic storage case that keeps it protected and clean between sessions.

Getting the Most From Your Hornady Ball Micrometer

This tool shines on flat objects and case necks, so keep it for the work it was designed to do rather than measuring the outside diameter of round stock. Take your time, let the ratchet set the pressure for you, and record your readings as you sort. Treat it well and it will give you years of reliable, precise case prep.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 050059
  • UPC: 090255500592
  • Product Type: Vernier Micrometer
  • Measuring Range: 0 to 1 inch
  • Accuracy: 0.0001 inch
  • Anvil Style: Round ball anvil with tapered spindle
  • Measuring Pressure: Ratchet stop for repeatability
  • Lock: Spindle lock to preserve readings
  • Frame Finish: Baked-enamel C-frame
  • Primary Use: Measuring case neck wall thickness
  • Shipping Weight: 0.87 lbs

What’s Included

  • Hornady Vernier Ball Micrometer
  • Plastic storage case

Frequently Asked Questions

What makes the Vernier Ball Micrometer different from a regular micrometer?

It uses a round ball anvil paired with a tapered spindle instead of the usual flat faces. That design lets you reach down into a case neck and measure wall thickness right up to the shoulder, which a standard flat-anvil mic cannot do. It is built specifically for case neck measurement rather than general-purpose work.

How accurate is the Hornady Vernier Ball Micrometer?

It reads down to 0.0001 inch across a 0 to 1 inch range. The ratchet stop applies uniform pressure each time you close the spindle, which keeps your readings repeatable from case to case. That level of resolution is plenty for sorting brass and spotting uneven necks.

Can I use this micrometer to measure the outside diameter of round objects?

This tool is designed for flat objects and case neck wall thickness, not for measuring the outside diameter of round stock. The ball anvil is shaped to reach inside necks and read against the inner wall. For round outside-diameter work, a standard flat-anvil micrometer or caliper is the better pick.

What does the spindle lock do?

The spindle lock holds the thimble in place so your measurement stays put when you pull the case away from the tool. That makes it easy to read the vernier scale without worrying about the number shifting on you. It is a small touch that helps keep your data consistent while you sort through a batch.

Additional information

UPC

090255500592

Manufacturer

Manufacturer Part Number

050059

Product Type

Vernier Micrometer

Shipping Weight

0.87

Reviews

There are no reviews yet.

Be the first to review “Hornady Vernier Ball Micrometer 0-1″ 0.0001″ Case Neck Tool”