Description
The 22 ARC has quickly become a favorite for AR-15 shooters chasing flat-shooting, high-BC .224 bullets, and if you're loading your own brass for it, a quality sizing die is where good ammo starts. This is Hornady's Series I full length sizing die for the 22 ARC, a single die (not a complete two-die set) that resizes the entire case body and neck back to SAAMI spec. Full length sizing is the way to go for semi-auto feeding reliability and for brass that's been fired across more than one chamber, since it brings everything back to a consistent, dependable dimension every time.
What Sets the 22 ARC Sizing Die Apart
Hornady builds these dies with a hand-polished interior that's guaranteed not to scratch your brass, which matters when you're trying to stretch case life and keep neck tension uniform. The polished elliptical expander is a nice touch too, reducing neck friction and case stretch as the brass pulls back over it. That means less work on your lube, smoother strokes on the press, and cases that stay truer over multiple firings.
Zip Spindle and Hardened Decapping Pin
The standout upgrade on this die is the Zip Spindle. It uses a series of light threads cut into the spindle and collet that lock the decapping assembly in place so it won't creep or slip once you've set it. Dialing in your depriming depth and locking it down is quick and stays put. The hardened steel decapping pin is tough enough to punch through crimped primer pockets without bending or snapping, so mixed range brass isn't a problem.
Built to Last
Hornady backs its Custom Grade dies with a lifetime guarantee against breaking or wearing out under normal use, which tells you how they feel about the machining quality. The die is threaded 7/8-14, so it drops right into any standard reloading press. If you already have a seating die or run a separate neck-sizing or bushing setup, this single full length die slots right into your 22 ARC process without paying for pieces you don't need.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 046440
- UPC: 090255464405
- Cartridge: .22 ARC (.224)
- Die Type: Full Length Sizing Die
- Series: Series I Custom Grade
- Thread Size: 7/8-14
- Carbide: No
- Decapping Pin: Hardened steel
- Spindle: Zip Spindle
- Expander: Polished elliptical
- Shipping Weight: 0.53 lbs
What’s Included
- Hornady Series I Full Length Sizing Die for 22 ARC
- Zip Spindle decapping assembly with hardened steel decapping pin
- Sure-Loc lock ring
Frequently Asked Questions
Is this a complete two-die set or just the sizing die?
This is the single Series I full length sizing die for the 22 ARC, part number 046440. It is not the complete two-die set. If you also need a bullet seating die, Hornady offers the 22 ARC two-die set separately under part number 546213.
Will the 22 ARC sizing die fit my press?
Yes. It uses the standard 7/8-14 thread, so it threads into any common single-stage or progressive reloading press. No special adapters are needed.
What does the Zip Spindle actually do?
The Zip Spindle has light threads cut into the spindle and collet that lock the decapping rod in place so it doesn't slip during use. It makes setting and tightening your depriming depth fast and keeps it from creeping once you've dialed it in.
Can this die deprime brass with crimped primer pockets?
It can. The hardened steel decapping pin is built to punch out spent primers from crimped pockets without bending or breaking, which is handy if you're working with mixed or military-style brass.




Reviews
There are no reviews yet.