0
0

Hornady 300 WSM Match Grade Full-Length Bushing Sizing Die

UPC: 090255462425

$61.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading precision 300 Winchester Short Magnum and you're tired of standard dies hammering your necks down further than they need to go, this is the fix. The Hornady Match Grade Full-Length Die for 300 WSM is a bushing-style full-length sizer that lets you choose exactly how much neck tension you want instead of accepting a one-size setting. It sizes the body and bumps the shoulder like a normal full-length die, but the neck work is handled by an interchangeable bushing you select for your specific brass.

What Sets the 300 WSM Match Grade Die Apart

The magic here is the self-centering bushing system. The bushing floats in the die body so it aligns itself to the case, which helps keep runout low and necks concentric. Hornady offers bushings in .002 inch increments, and the die will also accept bushings from RCBS, Redding, and Wilson, so you're not locked into one source. Because you're only sizing the neck down the amount you actually need, you work the brass less and it tends to last longer through more loading cycles. The die features an elliptical expander and a replaceable decap pin retainer, giving you flexibility in how you set things up.

Picking the Right Bushing for Your 300 WSM Brass

Bushings are sold separately, which is standard for this style of die and lets you tune to your exact components. The usual method is to measure the outside neck diameter of a loaded round, then subtract about .002 to .003 inch to land on your starting bushing size. Different brass brands have slightly different neck wall thickness, so it pays to measure your own cases rather than guess. Many loaders keep a bushing one size above and below their target on hand to fine-tune tension.

Built for the Precision 300 WSM Handloader

This is a .308 caliber die built to tight tolerances for repeatable results at the press. It uses standard 7/8-14 threads, so it drops into any common single-stage or progressive press. For anyone chasing consistency with the short magnum, this die is a smart step up from a basic sizer.

Key Specifications

  • Manufacturer: Hornady
  • Caliber: .300 Winchester Short Magnum (WSM)
  • Projectile Diameter: .308
  • Die Type: Match Grade Full-Length Bushing Sizing Die
  • Bushing System: Interchangeable self-centering neck bushings (sold separately)
  • Bushing Compatibility: Accepts Hornady, RCBS, Redding, and Wilson bushings
  • Thread Size: 7/8-14
  • Material: Steel
  • Features: Elliptical expander, replaceable decap pin retainer
  • Quantity: 1 die
  • Manufacturer Part Number: 046242
  • UPC: 090255462425
  • Shipping Weight: 0.575 lbs

What’s Included

  • Hornady 300 WSM Match Grade Full-Length Bushing Sizing Die (1)
  • Elliptical expander
  • Decap pin retainer

Frequently Asked Questions

Does the Hornady 300 WSM Match Grade Die come with a bushing?

No, the neck bushings are sold separately for this die. This is standard for bushing-style match dies because it lets you choose the exact bushing size that matches your brass and desired neck tension. You'll want to pick up at least one bushing to complete the setup before loading.

How do I know which bushing size to buy for my 300 WSM loads?

Measure the outside neck diameter of a loaded round with calipers, then subtract roughly .002 to .003 inch to find your starting bushing size. Bushings come in .002 inch increments, so it's smart to keep one size above and below your target on hand for fine-tuning. Since neck wall thickness varies between brass brands, always measure your own cases rather than relying on a chart.

Can I use bushings from other brands in this Hornady die?

Yes. The Hornady Match Grade bushing dies will accept bushings made by RCBS, Redding, and Wilson in addition to Hornady's own bushings. That flexibility makes it easier to source the exact size you need without being tied to a single supplier.

Is this a full die set or just the sizing die?

This is the full-length bushing sizing die only, not a complete set. It handles body sizing, shoulder bump, and bushing-controlled neck sizing. If you also need a seating die, you'll want to add one separately or look at the Match Grade two-die set.

Additional information

UPC

090255462425

Manufacturer

Manufacturer Part Number

046242

Shipping Weight

0.575

Reviews

There are no reviews yet.

Be the first to review “Hornady 300 WSM Match Grade Full-Length Bushing Sizing Die”