Description
The Hornady 168 grain .308 Boat Tail Hollow Point has earned its reputation the old fashioned way, by printing tight groups for decades of reloaders chasing accuracy. This is a component projectile meant for handloading, not finished ammunition, so you'll be seating these into your own brass with your preferred powder and primer. For anyone building .308 Winchester target loads, it's about as classic a bullet as it gets.
The foundation here is Hornady's AMP (Advanced Manufacturing Process) jacket. These jackets are engineered to the tightest standards in the industry, with virtually zero runout and almost no variation in wall thickness. That consistency matters because an out-of-balance bullet spins unevenly and opens up your groups. Pair that jacket with a precision swaged lead core and you get projectiles that come off the press balanced and uniform, shot after shot.
What the 168gr .308 BTHP Brings to the Bench
This bullet runs a secant ogive profile and a tailored boat tail, a combination that keeps drag low and trajectories flat. It carries a .450 G1 ballistic coefficient and a .253 sectional density, numbers that have made the 168 grain weight a longtime favorite for both bolt guns and gas guns. Reloaders running AR-10 platforms and bolt-action .308s regularly report groups at or near MOA with common powders like H4895.
Loading the Hornady 168gr Match Bullet
At a 0.308 inch diameter, these drop right into standard .30 caliber load data for .308 Winchester, .30-06, and similar cases. The 168 grain weight is forgiving to work with and well documented across just about every reloading manual out there, so finding a starting recipe is easy. Keep in mind Hornady positions these as target and match projectiles rather than hunting bullets, so they're at their best punching paper and ringing steel.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 305016
- UPC: 090255305012
- Product Line: Match
- Caliber: .30 Caliber
- Bullet Diameter: .308 in
- Bullet Weight: 168 grain
- Bullet Style: Boat Tail Hollow Point (BTHP)
- Ballistic Coefficient: .450 (G1)
- Sectional Density: .253
- Jacket: AMP (Advanced Manufacturing Process)
- Core: Swaged Lead
- Application: Target / Match
- Quantity: 250 per box
What’s Included
- 250 Hornady Match 30 Cal .308 168gr BTHP projectiles
Frequently Asked Questions
Are these Hornady 168gr .308 BTHP bullets loaded ammunition?
No, these are component projectiles intended for handloading, not finished cartridges. You'll seat them into your own brass with your chosen powder and primer. If you're not a reloader, you'll want loaded .308 ammo instead.
What's the ballistic coefficient on the 168 grain Match bullet?
This bullet carries a .450 G1 ballistic coefficient and a .253 sectional density. The secant ogive and boat tail work together to keep drag low and the trajectory flat, which is part of why the 168 grain weight has been a match staple for so long.
Will these work in an AR-10 as well as a bolt gun?
Yes, the 168 grain .308 BTHP loads well for both gas guns and bolt-action rifles. Reloaders running AR-10 platforms regularly report accurate, reliable results, with many getting groups right around MOA using common .308 powders. Just build to proper load data for your platform.
Are the Hornady 168gr Match bullets good for hunting?
Hornady designs these as target and match projectiles rather than hunting bullets, and they recommend against using them for hunting. The hollow point here is built for accuracy and ballistic efficiency, not for the terminal expansion you'd want on game. For hunting, look to a dedicated bullet line like SST or CX.




Reviews
There are no reviews yet.