Description
The Hornady SST, short for Super Shock Tip, is one of the more popular hunting projectiles for the 7mm family, and this 154 grain .284 diameter version is a sweet spot for a lot of 7mm chamberings. It carries a .525 G1 ballistic coefficient and a .273 sectional density, which is a nice combination of flat flight downrange and enough weight to drive deep on game. The build is a traditional cup and core setup with a copper jacket over a lead core, a polymer tip up front, and a secant ogive boat tail profile that helps it slip through the air cleanly.
What Sets the 7mm 154 gr SST Apart
The polymer tip does double duty here. It sharpens up the nose for better aerodynamics and a higher BC, and on impact it drives back into the core to kick off rapid, reliable expansion. That expansion creates a wide wound channel, which is a big reason the SST has earned its reputation on whitetails and other thin-skinned game. The secant ogive is what gives it that efficient downrange energy retention hunters are after.
Loading the Hornady 154 gr SST
These are reloading components, not loaded rounds, so you're building your own ammo. The bullet features a cannelure, which gives you a clean spot to crimp and also works alongside Hornady's InterLock ring to hold the jacket and core together during expansion. That InterLock design is the key to solid weight retention, which keeps penetration consistent even when the bullet expands aggressively. It's a popular pick for the 7mm Rem Mag, but it works across the 7mm lineup including .280 Remington, .280 Ackley Improved, 7mm-08 and others running the .284 diameter.
Game and Range Use
Factory SST loads in this weight run around 3,100 fps out of a 7mm Rem Mag, so you can expect similar flat-shooting potential from a well-developed handload. Reloaders report tight groups with this bullet, and it's a solid all-around choice for medium game like deer and antelope on up to larger animals when you place your shots. Each box contains 100 bullets, giving you plenty of components for load workup and a season's worth of hunting.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 28302
- UPC: 090255283020
- Bullet Type: SST (Super Shock Tip)
- Caliber: 7mm
- Bullet Diameter: .284"
- Bullet Weight: 154 Grain
- Ballistic Coefficient (G1): .525
- Sectional Density: .273
- Jacket Material: Copper
- Core Material: Lead
- Tip Material: Polymer
- Cannelure: Yes
- Profile: Secant Ogive Boat Tail
- Application: Medium and Large Game
- Quantity: 100 Per Box
What’s Included
- 100 Hornady 7mm (.284) 154 gr SST bullets
Frequently Asked Questions
What calibers can I load the Hornady 7mm 154 gr SST in?
This is a .284 diameter bullet, so it works in any 7mm cartridge that uses that standard diameter. Common choices include the 7mm Rem Mag, .280 Remington, .280 Ackley Improved and 7mm-08 Remington. Always confirm your load data and check that this diameter matches your chamber before loading.
Are these loaded cartridges or just the bullets?
These are reloading components only, meaning you get the projectiles by themselves. You'll need your own brass, primers and powder to assemble finished ammunition. Pair them with published 7mm load data for the cartridge you're building.
What game is the 154 gr SST best suited for?
Hornady lists this bullet for medium and large game, and it's a longtime favorite for whitetail and mule deer. The polymer tip and InterLock ring give it quick expansion with solid weight retention, which makes it capable on larger animals like elk with good shot placement. It's a versatile all-around hunting bullet in the 7mm family.
Does the SST have a cannelure for crimping?
Yes, this bullet has a cannelure, so you can apply a roll crimp if your load or firearm calls for one. The cannelure also works together with Hornady's InterLock ring to help keep the jacket and core bonded during expansion. That's one of the features that gives the SST its consistent terminal performance.





Reviews
There are no reviews yet.