Description
The Hornady A-Tip Match is about as refined as a factory match bullet gets, and it shows the second you crack the box. Instead of a polymer nose, these 6mm (.243 diameter) bullets wear a precision machined aluminum tip that runs longer than a typical plastic one. That extra length shifts the center of gravity forward, which helps the bullet settle down and stay stable in flight. The payoff is tighter groups and more consistent behavior from one shot to the next.
What Sets the A-Tip Match 110gr Apart
Hornady's Ballistic Development Group spent years dialing in the shape here, and the numbers back it up. This 110 grain pill carries a .604 G1 and .304 G7 ballistic coefficient along with a .266 sectional density, numbers that keep it bucking wind and holding velocity at distance. The low drag profile was verified with Doppler radar, and the design tends to be forgiving of twist rate, seating depth, and muzzle velocity, so you have some room to work when you're building a load. Hornady recommends a 1:7.7 inch twist as the minimum to get the most out of it.
Loading the 6mm A-Tip Match
The boat tail base and optimized ogive make these a joy to seat and send, but there's one thing worth knowing up front. These bullets are seated best with Hornady's dedicated A-Tip seating stem, which is sold separately, so grab one if you don't already run it. The aluminum tip won't soften or degrade from heat the way some polymer tips can, which is a nice bonus over long strings of fire.
Consistency You Can Feel in the Box
What really separates this line is how it's packaged. The bullets come sequentially, one clone right after the next, with minimal handling through the whole process. Each box also ships with a polishing bag since the bullets aren't bulk washed after manufacture, so you can prep them your way before loading. For 6mm Creedmoor, 6 Dasher, 6XC, and similar precision rounds, this is a top shelf choice when you're chasing every last bit of accuracy.
Key Specifications
- Manufacturer: Hornady
- Model: A-Tip Match
- Manufacturer Part Number: 24531
- UPC: 090255245318
- Caliber: 6mm (.243 Diameter)
- Bullet Weight: 110 Grain
- Bullet Style: Aluminum Tip Boat Tail
- Ballistic Coefficient: .604 (G1) / .304 (G7)
- Sectional Density: .266
- Minimum Recommended Twist Rate: 1:7.7 inch
- Jacket: AMP Jacket
- Application: Target / Match
- Quantity: 100 Per Box
What’s Included
- 100 Hornady A-Tip Match 6mm 110gr bullets
- Polishing bag for bullet prep before loading
Frequently Asked Questions
Do I need a special seating stem for the A-Tip Match bullets?
Yes. Hornady recommends using their dedicated A-Tip seating stem for best results, and it's sold separately. The aluminum tip has a different profile than standard polymer tips, so the correct stem helps you seat cleanly without marring the bullet and keeps your seating depth consistent.
What twist rate do I need to stabilize the 110gr 6mm A-Tip Match?
Hornady lists a 1:7.7 inch twist as the minimum recommended rate for this 110 grain bullet. Barrels at that twist or faster, like a common 1:7 or 1:7.5, will stabilize it well. Slower twists may not fully stabilize the long, high-BC projectile.
Why does this bullet come with a polishing bag?
Because the A-Tip bullets aren't bulk washed after manufacture, Hornady includes a polishing bag so you can prep them yourself before loading. It lets you clean off any residue from the machining and handling process. Many reloaders appreciate the extra control over their final prep.
What cartridges is the 6mm A-Tip Match 110gr a good fit for?
This .243 diameter bullet works across popular 6mm precision cartridges like the 6mm Creedmoor, 6 Dasher, 6XC, and 6mm BR variants running the right twist. Its high ballistic coefficient and forgiving design make it a strong pick for long-range target and match work where every bit of accuracy counts.




Reviews
There are no reviews yet.