Description
If you handload for a classic .32, good bullets in .321 diameter aren't exactly growing on trees, which is what makes the Hornady InterLock 170-grain flat point such a staple on the reloading bench. This is a traditional cup-and-core projectile with a copper jacket over a tough lead alloy core, built to open up reliably and drive deep on medium game. The flat point nose shape is the detail that matters most here since it's safe to stack in a tubular magazine, so these feed right into your .32 Winchester Special or .32 Remington lever action without worry.
What Makes the InterLock 32 Cal Flat Point Tick
The namesake InterLock ring is a raised band embedded in the bullet's core that mechanically locks the jacket and lead together. When the bullet expands, that ring keeps the two pieces married so the projectile holds onto its mass and keeps pushing through. You get a big part of the bullet's weight carried to the far side of the animal, which is exactly what you want from a short to moderate range deer load. Hornady also controls the jacket taper so the bullet expands across a range of velocities rather than needing one perfect speed to perform.
Loading the Hornady .321 170 Grain FP
There's a cannelure rolled into the bullet that gives you a clean spot to apply a solid crimp, which is important for tube-fed lever guns where recoil can shove bullets around in the magazine. The 170-grain weight carries a G1 ballistic coefficient right around .249 and a sectional density near .236, numbers that play nicely with the .32 Win Special's working range. These are component projectiles only, not loaded ammunition, so you'll supply your own brass, primers, and powder.
For anyone keeping an old Model 94 or Remington pump fed and shooting well, this is the go-to bullet that keeps those rifles useful in the deer woods year after year.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 3210
- UPC: 090255232103
- Caliber: 32 Caliber (.321)
- Bullet Diameter: .321 in
- Bullet Weight: 170 Grains
- Bullet Style: Flat Point (FP)
- Bullet Line: InterLock
- Jacket Material: Copper
- Core Material: Lead Alloy
- Cannelure: Yes
- Ballistic Coefficient (G1): 0.249
- Sectional Density: 0.236
- Quantity: 100 Per Box
- Type: Component Bullets (Not Loaded Ammunition)
What’s Included
- 100 Hornady InterLock 32 Cal .321 170 gr Flat Point component bullets
Frequently Asked Questions
What cartridges are these Hornady InterLock 32 Cal .321 bullets used for?
These .321 diameter 170-grain bullets are made for reloading the .32 Winchester Special and .32 Remington. The .321 bore size is specific to those cartridges and is not interchangeable with .30-30 or other .30 caliber loads that use .308 bullets. Always confirm your chamber and bore before loading.
Are the flat point InterLock bullets safe for tubular magazine lever actions?
Yes, the flat nose profile is the reason this bullet exists in this form. A flat point sits against the primer of the cartridge ahead of it in a tube magazine without the risk a pointed tip would create under recoil. That makes it the right choice for lever guns and pump actions fed from a tubular magazine.
What does the InterLock ring actually do?
The InterLock ring is a raised band inside the jacket that's embedded into the lead core. It mechanically locks the jacket and core together so they stay as one piece during expansion. The result is strong weight retention and deep penetration, which is why this bullet has a long reputation as a dependable hunting projectile.
Is this loaded ammunition or a component bullet?
This is a box of 100 component bullets only, not finished ammunition. You'll need your own brass, primers, and powder to assemble complete rounds. The rolled cannelure gives you a clean crimp groove, which is especially helpful for tube-fed rifles.




Reviews
There are no reviews yet.