Description
If you cast your own .308 bullets, the sizing and lubing step is where good bullets become great ones. The RCBS Lube-A-Matic .308 Sizer Die (part number 82211) handles both jobs at once, bringing your cast lead bullets down to the proper diameter while pushing fresh lube into the grease grooves. It's precision-honed to within 0.0005 inches, so every bullet that comes out the top is uniform and ready to load.
What the .308 Lube-A-Matic Die Brings to the Bench
The inside of the die is hardened, which does two things worth caring about. First, it keeps the bore dimension stable over thousands of bullets so you aren't chasing a worn-out die. Second, it helps keep each bullet aligned as it passes through, giving you clean, cylindrical results instead of lopsided ones. The .308 diameter makes this a natural fit for .30 caliber cast projectiles headed for 30-30, .308 Winchester, .30-06 and similar loads, depending on how your particular mold drops.
Fitting the Sizer Die Into Your Setup
This die threads into the RCBS Lube-A-Matic-2 Bullet Sizer/Lubricator, and it's also compatible with the Lyman 450 and 4500 lube sizers, so it plays nice if you're already running a Lyman press. The die works with the gas check seating step too, which is handy if you're loading cast bullets at higher velocities and want that copper check crimped on cleanly.
One thing to plan for: the top punch is sold separately. The punch is matched to your specific bullet nose profile, so you'll want to pair this die with the correct punch for your mold to keep from marring the bullet tip. Grab the right punch and a stick of bullet lube and you've got a complete sizing station that'll run for years. For anyone casting .30 caliber in volume, a dedicated sizer die like this one takes the guesswork out of getting every bullet to the same diameter.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 82211
- UPC: 076683822116
- Bullet Diameter: .308 in
- Caliber: .30 Caliber / .308
- Tolerance: 0.0005 in
- Interior: Hardened steel
- Function: Sizes and lubricates cast lead bullets, seats gas checks
- Compatibility: RCBS Lube-A-Matic-2 Sizer/Lubricator, Lyman 450/4500 Lube Sizer
- Top Punch: Sold separately
- Country of Origin: Made in USA
What’s Included
- RCBS Lube-A-Matic .308 Bullet Sizer Die (1)
Frequently Asked Questions
Does the Lube-A-Matic .308 die come with a top punch?
No, the top punch is sold separately. The punch is machined to match a specific bullet nose shape, so you'll want to pick the correct one for your mold to avoid damaging the bullet tip during sizing. Pairing the right punch with this die gives you a complete sizing and lubing station.
What presses does this RCBS sizer die fit?
It threads into the RCBS Lube-A-Matic-2 Bullet Sizer/Lubricator and is also compatible with the Lyman 450 and 4500 lube sizers. If you're already set up with a Lyman press, this die will work right alongside it. The sizer and press are the two halves you need to get bullets sized and lubed.
Can this die seat gas checks?
Yes. When used with a compatible Lube-A-Matic or Lyman sizer, the die helps set and crimp gas checks onto your cast bullets as they pass through. That's useful when you're pushing cast bullets at higher velocities and want the gas check seated cleanly.
What bullets is the .308 diameter meant for?
This die sizes .30 caliber cast lead bullets down to .308 inch, which suits common loads like .308 Winchester, .30-06 and 30-30, depending on how your mold drops. Getting the diameter right matters because an undersized bullet won't seal the bore and an oversized one can cause chambering trouble. Match the die to the diameter your rifle shoots best.




Reviews
There are no reviews yet.