Description
The 6.5-300 Weatherby Magnum is a speed demon, pushing 6.5mm bullets faster than just about anything else in its class, and feeding it quality handloads is where this RCBS die set earns its keep. This is the standard two-die group D set built around a Full-Length Sizer Die and a Seater Die, giving you everything needed to turn fired brass back into match-ready ammo. It threads in at the familiar 7/8"-14 standard, so it works with any common single-stage or turret press you've probably already got on the bench.
What the 6.5-300 Weatherby Magnum Die Set Does on the Bench
The Full-Length Sizer Die brings fired cases back to SAAMI minimum dimensions, sizing the outside of the case, de-priming, and expanding the neck so it's ready to accept the next bullet. Vent holes in the sizer let trapped air and extra lube escape, which helps keep cases from getting dinged or dented during the stroke. Headspace is held to tight tolerances to keep the case body length consistent, and that consistency is a big part of what makes this big-cased magnum shoot well downrange.
Seating and Crimping with the RCBS 6.5-300 Weatherby Set
The Seater Die comes with a bullet seater plug and a built-in roll crimper, so you can seat the bullet and crimp in the same stroke if your load calls for it. For a cartridge throwing heavy 6.5mm pintails at high velocity, getting bullet seating depth repeatable matters, and the adjustable seater stem lets you dial it in to your rifle's chamber.
A Few Things Worth Knowing
This is a die set only, so you'll want the correct shell holder to run it. The 6.5-300 Weatherby Magnum uses the RCBS #4 shell holder, which is sold separately and shared with a long list of belted magnums like the .300 Win Mag and .300 Weatherby. Since 6.5-300 brass can run pricey, plenty of folks form their own by necking down .300 Weatherby cases, and this set handles that fired brass just fine once it's sized. RCBS has been building reloading gear for decades, and the green box still ships from the USA.
Key Specifications
- Manufacturer: RCBS
- Cartridge: 6.5-300 Weatherby Magnum
- Die Type: Full-Length 2-Die Set
- Die Group: Group D
- Thread: Standard 7/8"-14
- Material: Proprietary Die Steel
- Shell Holder: RCBS #4 (sold separately)
- Manufacturer Part Number: 31701
- UPC: 076683317018
- Country of Origin: Made in USA
- Shipping Weight: 1.335 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- Green RCBS die box
Frequently Asked Questions
Does the RCBS 6.5-300 Weatherby Magnum die set include a shell holder?
No, the shell holder is not included and is sold separately. The 6.5-300 Weatherby Magnum uses the RCBS #4 shell holder, which also fits a bunch of other belted magnums like the .300 Winchester Magnum and .300 Weatherby. Pick one up if you don't already have it on the bench.
Will these dies fit my reloading press?
Yes. The set uses the standard 7/8"-14 thread, so it threads into any common single-stage or turret press. That covers just about every press you'll find from the major brands.
Can I form 6.5-300 Weatherby brass from .300 Weatherby cases with this set?
The full-length sizer will size 6.5-300 Weatherby brass to spec once it's formed, and many reloaders neck down .300 Weatherby Magnum cases to make their own. That said, a dedicated case forming die set makes the initial neck-down step cleaner. Once your brass is formed and fired, this set handles the routine reloading.
Does the seater die crimp the bullet?
Yes, the Seater Die has a built-in roll crimper, so it can seat the bullet and apply a roll crimp in the same stroke. You can back the crimp out if you'd rather seat without crimping, which is common for a precision magnum load.




Reviews
There are no reviews yet.