0
0

RCBS Full-Length 2-Die Set .30 Nosler – MPN 29250

UPC: 076683292506

$95.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're running a .30 Nosler and want to take control of your handloads, this RCBS Full-Length Die Set gives you the two tools that do the heavy lifting. It's a standard two-die setup built for bottleneck cases, with a full-length sizing die on one side and a bullet seating die on the other. RCBS has been turning out reloading gear for decades, and these dies carry that same reputation for tight tolerances and solid, no-drama operation on the press.

What the .30 Nosler Die Set Does on the Press

The full-length sizer die brings your fired brass back down to SAAMI minimum cartridge dimensions, sizing the outside of the case, de-priming, and expanding the neck so it's ready to take a bullet. It also has built-in vents that let trapped air and extra lube escape, which keeps your cases from getting dented or damaged during sizing. Headspace is held to minimum tolerances so the case body length stays consistent round after round, and that consistency is what keeps your rifle chambering smoothly.

Seating and Finishing With the RCBS .30 Nosler Dies

The seater die uses an adjustable bullet seater plug and includes a crimp feature to lock the bullet in place as it's seated. The expander-decapping assembly locks down to eliminate slippage, and the three-piece design makes swapping a decapping pin quick if you ever bend one. Fine knurling on the die bodies gives you a non-slip grip for easy adjustment, and the hardened steel bodies are made to hold up through plenty of loading sessions.

These dies use the standard 7/8-14 thread, so they'll thread right into any standard reloading press and work with your existing .30 Nosler shell holder. For the .30 Nosler loader who wants factory-level accuracy and the freedom to tune a load to a specific rifle, this is a straightforward, dependable starting point. Ships in the classic RCBS green die box.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .30 Nosler
  • Manufacturer Part Number: 29250
  • UPC: 076683292506
  • Die Set Type: Full-Length (Group D)
  • Number of Dies: 2
  • Dies Included: Full-Length Sizer Die, Bullet Seating Die
  • Thread: 7/8-14
  • Die Material: Proprietary Die Steel
  • Carbide: No
  • Case Type: Bottleneck Rifle
  • Country of Origin: Made in USA
  • Shipping Weight: 0.5 lbs

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Bullet Seater Die with Seater Plug
  • RCBS green die storage box

Frequently Asked Questions

What dies come in the RCBS .30 Nosler die set?

This is a two-die set that includes a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer handles resizing, de-priming, and neck expansion, while the seater sets your bullet to depth and crimps it in place. Together they cover the core steps of loading .30 Nosler brass.

Will these dies fit a standard reloading press?

Yes. The dies use the standard 7/8-14 thread, so they'll thread into any standard single-stage or progressive press that accepts that size. You'll also want the correct shell holder for .30 Nosler, which is not included in this set.

Are the RCBS .30 Nosler dies carbide?

No, this set is not carbide. It's machined from RCBS proprietary die steel with hardened die bodies. Since it's a bottleneck rifle cartridge set, you'll want to lube your cases before running them through the full-length sizer to prevent sticking.

Does the sizer die resize the full case?

Yes, this is a full-length die set, so the sizer brings the entire case back to SAAMI minimum dimensions rather than just working the neck. That makes it a good choice if your .30 Nosler brass has been fired in more than one rifle or you want reliable chambering. Headspace is held to minimum tolerances to keep case body length consistent.

Additional information

UPC

076683292506

Manufacturer

Manufacturer Part Number

29250

Shipping Weight

0.5

Reviews

There are no reviews yet.

Be the first to review “RCBS Full-Length 2-Die Set .30 Nosler – MPN 29250”