Description
If you're loading .300 AAC Blackout for an AR, the dies you pick matter more than most folks expect. Gas guns are rougher on brass than a bolt action, and a standard full-length die doesn't always size cases small enough to chamber every time. That's exactly the gap this RCBS AR Series set fills. It pairs a small base sizing die with a taper crimp seater, giving you the two tools you need to turn once-fired brass into reliable feeding ammo.
What the Small Base Sizer in This .300 Blackout Die Set Does
The small base die sizes brass down a touch smaller than SAAMI spec, tighter than you'd get from a standard full-length die. That extra bit of resizing is the whole point here. It brings the case body and base back in line so the round drops into an AR chamber and feeds without hanging up. Reloaders coming from standard dies often mention their resized brass finally chambering clean in a tight AR after switching to small base. It's the kind of difference you feel at the range, not just on paper.
The 7-Degree Taper Crimp Seater
The seating die uses a 7-degree taper crimp instead of a roll crimp, which is the right call for an autoloader. Taper crimping is more forgiving when your case lengths aren't perfectly uniform, and it helps keep bullets from backing out or getting shoved deeper during the rough feeding cycle of a semi-auto. It works well with straight jacketed bullets and cannelured projectiles alike. One thing worth knowing: if you're running big coated subsonic bullets, some loaders add a separate neck expander to make seating easier, and if you specifically want to crimp into a cannelure you'd want a roll crimp die instead.
These dies are machined to tight tolerances, hardened, and come packed in the standard black RCBS die box. They run fine on single-stage and progressive presses, so whether you're loading a box at a time or cranking out volume, they'll keep up. It's a purpose-built set from a company with decades of die-making behind it.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 22407
- UPC: 076683224071
- Caliber: .300 AAC Blackout
- Product Type: Small Base / Taper Crimp
- Number of Dies: 2
- Series: AR Series
- Crimp Angle: 7-degree taper crimp
- Carbide: No
- Press Compatibility: Single-stage and progressive
- Country of Origin: USA
What’s Included
- Small Base Full-Length Sizing Die
- Taper Crimp Bullet Seating Die
- Black RCBS die box
Frequently Asked Questions
Why use a small base die for .300 Blackout instead of a standard die?
A small base die sizes brass down a bit smaller than a standard full-length die, below SAAMI dimensions. That extra sizing is what gets your reloads to chamber reliably in a tight AR chamber. If you've had standard-sized brass feeling snug or sticky in your gas gun, this set is designed to solve exactly that.
Does this RCBS set include a seating die, or just the sizer?
It's a complete two-die set. You get the small base sizing die and a taper crimp seating die, so you can size, seat, and crimp without buying anything extra. For most .300 Blackout loaders this is everything you need to get rolling.
Will this work for loading subsonic .300 Blackout?
Yes, it handles both supersonic and subsonic loads. That said, if you're seating big-diameter coated subsonic bullets, some reloaders add a separate neck expander die to make seating smoother. For standard jacketed bullets the set works as-is right out of the box.
Can I run this die set on a progressive press?
Absolutely. The AR Series dies are a favorite among progressive loaders and work equally well on a single-stage press. Whether you're loading a handful of rounds or cranking out volume, they'll keep pace.





Reviews
There are no reviews yet.