0
0

RCBS Carbide Taper Crimp 3-Die Set .32 ACP (20015)

UPC: 076683200150

$91.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .32 ACP is one of those little cartridges that keeps a lot of vintage pocket pistols fed, and factory ammo can get tough to track down. This RCBS Carbide Taper Crimp 3-Die Set is built to keep those guns running by letting you roll your own with repeatable, reliable results. RCBS pioneered the 3-die setup for straight-wall pistol and rifle cases, and this is the proven formula applied to the .32 Auto.

The real convenience here is the carbide sizer die. The tungsten carbide ring inside is diamond-lapped so smooth that cases slide through without sticking or scratching, which means you can skip the case lubrication step entirely. For high-volume handgun loading, cutting out the lube and the cleanup afterward saves a real chunk of time at the bench.

What Each Die in the .32 ACP Set Does

The set is a three-step process. The carbide sizer die resizes the case back to spec and de-primes it in one pass thanks to the built-in decapping unit. The expander die opens the case mouth to the proper diameter and adds a slight flare, or bell, so your bullet seats without shaving or crushing. The seater die then presses the bullet to depth and applies a taper crimp, which is the preferred crimp style for a rimless, semi-auto cartridge like the .32 ACP since it preserves proper headspacing off the case mouth.

Fit and Finish You'd Expect From RCBS

The die bodies are made from polished and heat-treated steel, and they thread into any standard 7/8-14 reloading press, so they'll drop right into your single-stage or turret setup. RCBS also backs their gear with a reputation for solid instructions and an easy setup, which matters when you're dialing in loads for older guns with their own quirks.

One thing worth knowing before you order: the shellholder is sold separately, so grab the correct one for the .32 ACP if you don't already have it on hand.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .32 ACP / .32 Auto
  • Set Type: Carbide Taper Crimp 3-Die Set
  • Number of Dies: 3
  • Sizer Die Material: Tungsten Carbide
  • Lube Required: No
  • Crimp Type: Taper Crimp
  • Thread: 7/8-14 (standard)
  • Group: Group B
  • Country of Origin: United States
  • Manufacturer Part Number: 20015
  • UPC: 076683200150

What’s Included

  • Carbide sizer die with decapping unit
  • Expander die
  • Seater die with taper crimp and bullet seater plug
  • Instructions / load data sheet

Frequently Asked Questions

Do I need case lube with the RCBS .32 ACP carbide die set?

No, you can skip it. The sizer die uses a diamond-lapped tungsten carbide ring that lets cases pass through smoothly without sticking. That means no lubing before sizing and no cleaning the lube off afterward, which speeds up your loading sessions.

Does this RCBS .32 ACP set come with a shellholder?

No, the shellholder is sold separately. You'll want to pick up the correct RCBS shellholder for the .32 ACP if it isn't already in your kit. It's an inexpensive add-on but it's required to run the dies.

Why does this set use a taper crimp instead of a roll crimp?

The .32 ACP is a rimless, semi-auto cartridge that headspaces off the case mouth, so a taper crimp is the right call. A roll crimp would interfere with that headspacing, while the taper crimp secures the bullet and keeps the mouth square for reliable feeding and chambering.

Will these dies fit my reloading press?

Yes. The dies are made with the industry-standard 7/8-14 thread, so they'll thread into virtually any single-stage, turret, or progressive press. RCBS is also known for clear setup instructions, so getting them dialed in is straightforward.

Additional information

UPC

076683200150

Manufacturer

Manufacturer Part Number

20015

Shipping Weight

1.4625

Reviews

There are no reviews yet.

Be the first to review “RCBS Carbide Taper Crimp 3-Die Set .32 ACP (20015)”