Description
If you're running a bolt-action .204 Ruger and loading brass that keeps coming back to the same chamber, this is the die that squeezes more accuracy and more firings out of your cases. The RCBS Neck Sizer Die touches only the neck of the case, leaving the shoulder and body in their fire-formed shape. That means the brass stays matched to your rifle's chamber instead of getting worked back down to minimum dimensions every cycle, which cuts down on brass stretch and gives you clean, repeatable neck tension round after round.
It ships with the expander-decapping unit, so the die sizes the neck and knocks out the spent primer in a single stroke. The expander then sets the inside diameter of the neck just enough to grip the bullet snugly. The body is case-hardened steel, precision-drilled, reamed and polished, and it uses the standard 7/8-14 thread so it drops right into any common single-stage or turret press.
Why the .204 Ruger Neck Sizer Die Earns Its Spot
Neck sizing is a precision-first approach, and it's a favorite among benchrest and precision bolt-gun folks for a reason. Because you're only working the neck, the rest of the case stays tailored to your rifle, which tends to improve consistency and stretch brass life well beyond what full-length sizing gives you. For a fast, flat-shooting little round like the .204 Ruger, that kind of repeatability on the bench is exactly what you're chasing.
Getting the Most Out of This RCBS Die
A couple of things worth knowing up front. This die is meant for brass that's been fired in your bolt gun and is going back into that same rifle, so it's not the pick for semi-autos, lever guns, or ammo you plan to shoot across multiple rifles. The shell holder is sold separately, so grab the correct one for the .204 Ruger case head if you don't already have it on the bench. Like the rest of the RCBS die lineup, it's made in the USA and carries the company's lifetime guarantee.
Key Specifications
- Manufacturer: RCBS
- Caliber: .204 Ruger
- Die Type: Neck Sizer Die (Group A)
- Manufacturer Part Number: 10330
- UPC: 076683103307
- Material: Case-Hardened Steel
- Thread: Standard 7/8-14
- Includes: Expander-Decapping Unit
- Intended Use: Bolt-action rifles, same-rifle brass
- Country of Origin: USA
- Quantity: 1 die
- Warranty: RCBS Lifetime Guarantee
- Shipping Weight: 0.75 lb
What’s Included
- RCBS Neck Sizer Die (.204 Ruger)
- Expander-Decapping Unit
- Plastic storage case
Frequently Asked Questions
Does the RCBS Neck Sizer Die come with a shell holder?
No, the shell holder is sold separately. You'll want to pick up the correct shell holder for the .204 Ruger case head to use this die on your press. It does, however, include the expander-decapping unit right in the box.
Can I use neck-sized .204 Ruger brass in any rifle?
Neck sizing is meant for brass that's being fired in the same bolt-action rifle it came out of. Since the shoulder and body stay at their fire-formed dimensions, the case is matched to that specific chamber. For ammo you plan to shoot in multiple rifles, semi-autos, or lever guns, a full-length sizing die is the better call.
What does neck sizing do that full-length sizing doesn't?
A neck sizer works only the neck of the case and leaves the shoulder and body untouched in their fire-formed shape. That reduces how much the brass gets worked each cycle, which typically extends case life and helps deliver consistent neck tension. It's why a lot of precision bolt-gun and benchrest reloaders reach for it when their brass always returns to the same rifle.
Will this RCBS die fit my reloading press?
Yes. It uses the standard 7/8-14 die thread, so it threads into virtually any common single-stage or turret press. Just thread it in, set your sizing depth, and you're ready to run.




Reviews
There are no reviews yet.