0
0

RCBS Bullet Puller Collet .270 Cal (.277) – MPN 9424

UPC: 076683094247

$16.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Every reloader eventually loads something that needs to come apart, whether it's a wrong powder charge, a seating depth that missed the mark, or a batch of ammo you want to break down for the components. This RCBS collet is the .270 piece of that puzzle. It's built to work with the RCBS Standard Bullet Puller body (sold separately), slipping into the die and squeezing down on the bullet so you can pull it out without pounding anything on your bench.

The collet is machined from hardened steel and sized specifically for .277 diameter bullets, which covers the .270 Winchester family along with cartridges like the .270 WSM and .270 Weatherby. It's designed around jacketed and monolithic projectiles, so FMJ, hollow points, soft points, and all-copper bullets are right in its wheelhouse. Because the collet grips by closing its petals around the bullet shank, it needs a bit of straight shank to bite into, which is worth keeping in mind on bullets seated deep toward the ogive.

How the .270 Collet Earns Its Keep on the Press

Press-mounted pulling is a different animal than the kinetic hammer style. You raise the bullet into the collet with your ram, turn the lever on top of the puller to tighten the petals, then lower the ram to separate the case from the bullet. No powder spilled, no smacking a tool against a block of wood. For anyone breaking down a large batch, this setup moves a lot faster once it's dialed in, and you can see exactly what you're doing since the collet sits flush at the bottom of the die.

Picking the Right Collet for .270 Pulling

RCBS collets are caliber-specific, so this one handles the .270/.277 cartridges and nothing else. A handy trick: match your collet to the same bore size you'd use for a case trimmer pilot. Keep in mind the collet style grips best on jacketed and copper bullets rather than soft cast lead, which tends to deform under the petals. For folks who already run the RCBS Standard Bullet Puller, this is a straightforward, long-lasting addition to the drawer of calibers you can pull.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 9424
  • UPC: 076683094247
  • Product Type: Bullet Puller Collet
  • Caliber: .270 / 6.8mm (.277)
  • Material: Hardened Steel
  • Finish: Gray / Silver
  • Size: Standard
  • Compatible With: RCBS Standard Bullet Puller
  • Function: Pull Bullets
  • Length: 7.2 in
  • Quantity: 1

What’s Included

  • One RCBS .270 Caliber Bullet Puller Collet (MPN 9424)

Frequently Asked Questions

Does this collet come with the RCBS Standard Bullet Puller?

No, this is the collet only. It's designed to drop into the RCBS Standard Bullet Puller body, which is sold separately. You'll also want the correct shellholder for whatever .270 cartridge you're pulling.

What cartridges will the .270 collet work with?

It's sized for .277 diameter bullets, so it covers the .270 Winchester family along with cartridges like .270 WSM and .270 Weatherby. RCBS collets are caliber-specific, so this one sticks to the .270/.277 group. A quick way to confirm fit is to match it to the same size you'd use for a case trimmer pilot.

Will this collet pull cast lead bullets?

This style is built for jacketed and monolithic bullets like FMJ, hollow points, soft points, and all-copper projectiles. Soft cast lead tends to deform under the collet petals and can slip, so a kinetic hammer-style puller is the better call for plain lead bullets.

Why isn't the collet gripping some of my .270 rounds?

The petals need a bit of straight bullet shank to grab onto, so bullets seated deep toward the ogive can be tough. Make sure the handle is fully loose when you raise the bullet in, then tighten until you feel the petals catch. Heavily crimped rounds often pull easier if you bump the bullet slightly deeper with a seating die first to break the seal.

Additional information

UPC

076683094247

Manufacturer

Manufacturer Part Number

9424

Caliber/Gauge

.270 Caliber

Color

Silver

Length

7.2000

Product Type

Bullet Puller Collet

Quantity

1

Shipping Weight

0.0875

Reviews

There are no reviews yet.

Be the first to review “RCBS Bullet Puller Collet .270 Cal (.277) – MPN 9424”