Description
Every good reloading session starts with the brass sitting exactly where it should, and that is the whole job of the RCBS Shell Holder #32. It slides into the ram of your press and grips the case head so the case lines up straight with the die on every pull of the handle. RCBS cuts these to tight tolerances, so you get a snug fit that keeps your sizing and seating steps repeatable round after round.
What the RCBS #32 Shell Holder Fits
This one covers a well-loved family of cartridges. It works with 7.62×39, 6mm PPC, 22 PPC, 6.5 Grendel, 6mm ARC, and 22 ARC, among others that share the same case head and rim dimensions. If you are loading for an AK, a Grendel-chambered AR, or a modern 6mm ARC build, this is the holder you want in the ram. A single shell holder often covers several calibers that share a rim, which is part of why reloaders end up with a small drawer of these.
Why the #32 Is Built Like It Is
RCBS machines these from hardened steel, so they hold their shape and shrug off years of use at the press. The holder captures 0.125 inch of the case head, which keeps your headspacing consistent to SAAMI dimensions and takes the guesswork out of case alignment. There is nothing fancy going on here, and that is the point. It is a simple, durable part that does one thing well.
It drops into single-stage and turret presses with a standard shell holder slot, so it plays nicely with the RCBS Rock Chucker and similar setups from other brands. RCBS backs its reloading gear with a no-nonsense warranty, so if a piece of equipment ever quits on you, they stand behind it. Pick up the #32 and keep your bench stocked for the calibers you run most.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9232
- UPC: 076683092328
- Shell Holder Size: #32
- Material: Hardened Steel
- Finish: Silver
- Case Head Capture: 0.125 inch for SAAMI headspacing
- Compatible Calibers: 7.62×39, 6mm PPC, 22 PPC, 6.5 Grendel, 6mm ARC, 22 ARC
- Press Compatibility: Single-stage and turret presses
- Style: Press Type
- Quantity: 1
- Country of Origin: United States
What’s Included
- RCBS Shell Holder #32 (single unit)
Frequently Asked Questions
What calibers does the RCBS Shell Holder #32 fit?
The #32 is sized for cartridges sharing the same case head, including 7.62×39, 6mm PPC, 22 PPC, 6.5 Grendel, 6mm ARC, and 22 ARC. That makes it a popular pick for anyone loading for an AK, a Grendel AR, or a 6mm ARC build. Always double check your specific cartridge against an RCBS shell holder chart before loading.
Will the RCBS #32 shell holder work in my press?
It fits single-stage and turret presses that use a standard shell holder slot in the ram. That covers the RCBS Rock Chucker and comparable presses from most other major brands. It is not designed for the RCBS Auto-Prime hand priming tool.
What is the shell holder made of?
RCBS machines these from hardened steel with a silver finish. The hardened construction holds its tolerances and stands up to years of repeated use at the bench. It is a simple part built to last.
Do I need a separate shell holder for case trimming?
Yes. This press-type #32 is made for your reloading press, not for a case trimmer. RCBS offers a separate Trim Pro shell holder in #32 if you need one for trimming brass.




Reviews
There are no reviews yet.