Description
The Nosler AccuBond Long Range 7mm 168-grain bullet is for the 7mm reloader who wants one projectile that shoots flat, bucks the wind, and still opens up reliably on game at distance. This is a .284 diameter component bullet, not loaded ammo or brass, sold 100 to the box. It runs a bonded lead core, a tapered copper jacket, and Nosler's signature gray polymer tip that initiates expansion and keeps the tip from getting dinged up under recoil in the magazine.
Nosler developed the AccuBond-LR line to keep pace with high-grade optics and fast modern cartridges, aiming to stretch practical shooting out past 1,000 yards while still performing on big game. At 168 grains it carries a sectional density of 0.298 and a G1 ballistic coefficient of 0.616, with a G7 of 0.310. Nosler recommends using the G7 number when you're building drop charts and dialing dope, since it tracks truer for this bullet's long, sleek boat-tail profile.
What Sets the AccuBond-LR Apart
The big advantage here is the bonding process. Because the lead core is fused to the copper jacket, the bullet holds together at high impact velocities instead of coming apart, which is a weak spot for a lot of high-BC designs when the shot ends up closer than planned. You get rapid expansion for energy transfer paired with strong weight retention for deep penetration into the vitals.
Loading the 7mm 168gr AccuBond Long Range
The tangent ogive feeds smoothly and gives consistent seating depth, and it's designed to shoot accurately without needing to be jammed right up against the lands. One thing worth flagging from folks who've loaded these: it's a long bullet, so measure your magazine before you settle on an overall length. Keep impact velocity at or above the 1,300 fps minimum and you'll get dependable mushrooming all the way out, compared to the 1,800 fps minimum on most other Nosler hunting bullets. It's a solid match for 7mm chamberings like the 7mm Rem Mag, 28 Nosler, and 7mm PRC chasing elk, deer, and other big game.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 58623
- UPC: 054041586238
- Bullet Type: AccuBond Long Range (Spitzer Boat Tail)
- Caliber: 7mm
- Bullet Diameter: .284"
- Weight: 168 grain
- Ballistic Coefficient (G1): 0.616
- Ballistic Coefficient (G7): 0.310
- Sectional Density: 0.298
- Minimum Impact Velocity: 1,300 fps
- Jacket Material: Copper
- Core Material: Lead (Bonded)
- Tip Material: Gray Polymer
- Cannelure: No
- Quantity: 100 Per Box
What’s Included
- 100 Nosler AccuBond Long Range 7mm 168gr component bullets
Frequently Asked Questions
Are these loaded cartridges or just the bullets?
These are component bullets only, meant for handloaders. The box contains 100 of the 7mm 168-grain AccuBond Long Range projectiles with no brass, powder, or primers. You'll be seating them into your own prepped cases.
What's the minimum impact velocity for reliable expansion on the AccuBond-LR?
Nosler specs a minimum impact velocity of 1,300 fps for dependable expansion. That's noticeably lower than the 1,800 fps minimum on most other Nosler hunting bullets, which is what lets the AccuBond-LR open up reliably way out at distance. Keep your impact speed at or above that number and you're in good shape.
Should I use the G1 or G7 ballistic coefficient when building my dope?
Nosler recommends the G7 ballistic coefficient of 0.310 for the most accurate trajectory calculations on the AccuBond-LR line. The G1 BC of 0.616 is also published, but G7 tracks truer for this bullet's long, sleek boat-tail profile. Plug the G7 into your solver for the best drop and wind numbers.
Will these fit in a standard magazine?
This is a long bullet, so it's worth measuring your magazine before you commit to an overall length. Some loaders find they need to seat deeper to feed from the box, which can eat into case capacity. Mock up a dummy round first and confirm it chambers and feeds the way you want.





Reviews
There are no reviews yet.