Description
When you need to reach out and hold a pattern tight, the Winchester Invector-Plus X-Full choke tube is the piece that gets it done. It runs a .040 constriction, which is right in the extra-full range, so your shot string stays dense and centered on targets sitting out around 45 yards and beyond. It's built from 17-4 stainless steel with a black finish and a flush fit, meaning it tucks right into the muzzle without any tube hanging past the barrel.
What the Invector-Plus X-Full Tube Does for Your Pattern
The Invector-Plus system pairs a longer internal taper with Winchester's back-bored barrels, and that combination is the whole point here. The extended taper gives the shot column a smoother ride as it exits, which translates to more uniform pellet distribution and fewer stray fliers on your pattern board. It also seals up tight against the barrel so gases can't slip between the tube and the bore, which protects both the choke and your barrel over the long haul.
Fit and Build on This Winchester X-Full Choke
This tube is threaded for the Invector-Plus system, so it drops into 12 gauge Winchester and Browning back-bored barrels cut for that pattern. That covers a lot of ground, including guns like the Model 101, Supreme, Select, SX2, SX3, SX4, and SXP. The 17-4 stainless construction is the workhorse choice for choke tubes because it holds up to repeated shooting and swaps, and it's rated for lead shot with this X-Full constriction.
If you're chasing turkeys, running late-season pass-shooting on waterfowl, or just want a tighter tube for reaching distant targets, this is the constriction that keeps your pellets working together downrange. Keep it lightly oiled on the threads, back it out every so often to clean, and it'll ride in your barrel season after season.
Key Specifications
- Manufacturer: Winchester
- Manufacturer Part Number: 613050
- UPC: 048702186066
- Gauge: 12 Gauge
- Choke System: Invector-Plus
- Constriction: X-Full / Extra Full (.040)
- Profile: Flush Fit
- Material: 17-4 Stainless Steel
- Finish: Black
- Shot Type: Lead
- Recommended Range: 45+ Yards
- Diameter: 0.7 in
- Weight: 3.2 oz
- Chokes Included: One
What’s Included
- One (1) Winchester Invector-Plus X-Full flush choke tube
Frequently Asked Questions
What shotguns does the Winchester Invector-Plus X-Full choke tube fit?
It fits 12 gauge Winchester and Browning back-bored barrels threaded for the Invector-Plus system. That includes popular models like the Model 101, Supreme, Select, SX2, SX3, SX4, and SXP. It will not fit standard Invector or other choke systems, so confirm your barrel is marked Invector-Plus before ordering.
What is the constriction on this X-Full tube and how far will it reach?
This tube has a .040 constriction, which puts it in the extra-full or X-Full range for a tight, dense pattern. Winchester recommends it for targets out around 45 yards and beyond. That makes it a strong pick for turkey hunting, late-season waterfowl, and reaching distant clays.
Can I run steel shot through the Invector-Plus X-Full choke?
This particular X-Full constriction is rated for lead shot. While the Invector-Plus system overall is known for handling steel well in more open constrictions, you'll want to stick with lead through this tight X-Full tube. For steel loads, choose a more open Invector-Plus constriction better suited for it.
Is this a flush or extended choke tube?
This is the flush-fit version, so it seats fully inside the muzzle with nothing protruding past the barrel. It carries a black finish on 17-4 stainless steel. If you were expecting the extended Signature Series tube with a red band, this is the low-profile flush model instead.





Reviews
There are no reviews yet.