Description
Setting up a sizing die by feel alone leaves too much to chance, and this is where the Lyman Pro Headspace Gauge in .223 Rem earns its spot on the bench. It gives you a hard reference for both the minimum and maximum headspace on your cases, along with maximum case length, which takes the guesswork out of dialing in your full-length sizing die for one of the most popular bottleneck cartridges around.
The gauge is precision machined from corrosion-resistant stainless steel, so it holds its dimensions and shrugs off rust over a long life on the bench. Lyman borrowed the design cues from their Pro Die Sets, giving the body flat outside faces that keep it from rolling off your workspace and O-rings that provide a secure, non-slip grip while you work. Those small touches matter more than you'd think when you're handling it dozens of times during a load session.
How the Lyman Pro Headspace Gauge Works on the Bench
The idea is simple. You measure a case fired in your rifle, note that reading, then run brass through your sizing die and measure again to see exactly how far you've bumped the shoulder back. Most reloaders aim for right around .001 to .002 inches of bump for reliable chambering without overworking the brass. Using the gauge as a before-and-after comparator takes the mystery out of die setup and keeps every piece of brass consistent.
Why .223 Rem and 5.56 NATO Reloaders Reach for This Gauge
If you're loading .223 Rem or running 5.56 NATO brass through an AR or bolt gun, consistent headspace is the difference between rounds that feed every time and ones that give you trouble. This gauge is caliber-specific to the .223/5.56 family, so you get an accurate datum reference built for that case. Pair it with a good set of calipers and you've got a straightforward way to verify your handloads chamber correctly before they ever leave the loading room.
Key Specifications
- Manufacturer: Lyman
- Manufacturer Part Number: 7705100
- UPC: 011516751003
- Caliber: .223 Rem / 5.56 NATO
- Material: Corrosion-Resistant Stainless Steel
- Color: Stainless Steel / Silver
- Measures: Minimum and Maximum Headspace, Maximum Case Length
- Design Features: Flat Outside Faces, O-Ring Grip
- Cartridge Type: Bottleneck
- Length: 4.5 in
- Quantity: 1
What’s Included
- Lyman Pro Headspace Gauge .223 Rem (1)
Frequently Asked Questions
What does the Lyman Pro Headspace Gauge for .223 Rem actually measure?
It checks both minimum and maximum cartridge headspace as well as maximum case length. For reloading, most people use it as a comparator to see how much they've bumped the shoulder back during sizing. That makes it a go-to tool when setting up a sizing die for bottleneck cartridges like the .223 Rem.
Do I need calipers to use the Lyman Pro Headspace Gauge?
Yes, the gauge works alongside a set of calipers to give you your readings. You measure a fired case from your rifle, then measure again after sizing to see the difference. The gauge provides the fixed datum reference and the calipers give you the number.
Will this gauge work for 5.56 NATO brass too?
It's built for the .223 Rem / 5.56 NATO case family, so it works for brass in that caliber. Since both share the same external case dimensions, you can use it to check and set up loads running through AR-pattern rifles or bolt guns chambered for the round.
What makes the Lyman Pro Headspace Gauge different from a basic gauge?
It's machined from corrosion-resistant stainless steel for a long, rust-free life rather than a coated finish. The body also has flat outside faces so it won't roll off your bench and O-rings for a secure grip while you handle it. Those design touches come straight from Lyman's Pro Die Set line.




Reviews
There are no reviews yet.