Description
KelTec has never been afraid to go its own way, and the PR57 is proof of that. Chambered in 5.7x28mm and tipping the scales at just 13.86 ounces empty, it's nearly 40% lighter than the next lightest pistol in this caliber. The secret to that weight savings is a combination of a rotary barrel locking system and an internal blind magazine that eliminates the need for a traditional detachable box mag entirely. The result is a pistol that's slim, light, and holds 20+1 rounds of a fast, flat-shooting cartridge in a frame roughly comparable in size to a Glock 19.
What Makes the PR57's Loading System Work
The top-loading design is the PR57's most talked-about feature, and for good reason. Instead of swapping magazines, you load from the top using the two included 10-round polymer stripper clips, which guide rounds directly into the internal magazine and are then set aside. You can also thumb rounds in one at a time if you prefer. The stripper clip process has a short learning curve, but most people get comfortable with it quickly, and the clips themselves are inexpensive to add to your kit. Reloads are slower than a mag swap, no question, but for everyday carry use the 20+1 on board more than compensates.
PR57 Burnt Bronze: Controls, Sights, and Optics
The controls on the PR57 are deliberately minimal. There's a single slide-stop lever on the left side of the frame and a double-action-only trigger that breaks at around 4.5 pounds with no stacking. No manual safety, no mag release to worry about. Fixed three-dot sights handle iron sight duties, and the rear slide cover is removable to expose an RMSc-footprint optics mount. An optics plate is included in the box so you can run a red dot right out of the gate. The frame also features a single-slot accessory rail on the dustcover for a light or laser. The Burnt Bronze frame paired with the black serrated slide gives this variant a sharp, distinctive look that stands out from the standard black offering.
The 5.7x28mm cartridge itself is worth appreciating in this context. It produces minimal recoil and almost no muzzle flip, which makes follow-up shots easy to manage. Muzzle blast from the 4-inch barrel is noticeable, but felt recoil is genuinely mild. For a carry gun, the combination of low recoil, high capacity, and light weight is a compelling package.
Key Specifications
- Manufacturer: KelTec
- Model: PR57
- MPN: PR57BBRZ
- UPC: 640832011319
- Caliber: 5.7x28mm
- Capacity: 20+1
- Action: Semi-Auto, Hammer-Fired, Double-Action-Only
- Barrel Length: 4 inches
- Barrel Material: Stainless Steel
- Barrel Profile: Rotary
- Barrel Twist: 1:7 inches
- Overall Length: 7.16 inches
- Height: 4.95 inches
- Width: 0.94 inches
- Weight (Unloaded): 13.86 oz
- Frame Finish: Burnt Bronze
- Slide Description: Black, Optic Ready / Serrated
- Sights: Fixed Three-Dot
- Optics Footprint: Shield RMSc
- Accessory Rail: Single-Slot
- Feed System: Internal Fixed Magazine, Top-Loading via Stripper Clips
What’s Included
- KelTec PR57 Pistol
- Two 10-round polymer stripper clips
- Optics mounting plate (Shield RMSc footprint)
Frequently Asked Questions
Does the KelTec PR57 use a standard detachable magazine?
No, and that's by design. The PR57 uses an internal fixed magazine that holds 20 rounds, loaded from the top using the included stripper clips. You can also load it one round at a time by hand. There's no magazine release because there's no magazine to drop. It's an unconventional approach, but it's a big part of how KelTec kept the weight and profile so low.
How does reloading with stripper clips actually work?
Each polymer stripper clip holds 10 rounds. You lock the slide back, position the clip over the loading port, and press the rounds down into the internal magazine, then set the clip aside and repeat with the second. It takes a little practice to get smooth, but most people find it intuitive after a few sessions. Reloads are slower than swapping a box magazine, but with 20+1 on board you're starting with plenty of rounds before you need to think about it.
What optics fit the PR57's slide?
The PR57 is set up for the Shield RMSc footprint, and an optics mounting plate is included in the box. Once you remove the rear polymer slide cover, you can mount any compatible micro red dot with that footprint directly to the slide. Worth noting, the iron sights will not co-witness once an optic is installed, so plan to use the optic as your primary aiming system if you go that route.
Is the 5.7x28mm a good choice for everyday carry?
It's a legitimate option. The cartridge produces very little felt recoil and almost no muzzle flip, which makes it easy to stay on target for fast follow-up shots. Modern defensive 5.7x28mm loads offer solid terminal performance and tend to fragment rather than over-penetrate barriers, which is a real consideration for home defense. Ammo is more expensive and less widely available than 9mm, so plan accordingly if you go this route.
How does the PR57 compare in size to other 5.7mm pistols?
It's in a different category. The PR57 is nearly 40% lighter than the next lightest 5.7mm pistol currently on the market and comes in under an inch wide at its thickest point. Pistols like the FN Five-seveN and Ruger-57 are notably larger and heavier. The PR57's rotary barrel and fixed internal magazine are directly responsible for that compact, lightweight profile.
Does the KelTec PR57 have a manual safety?
No. The PR57 relies on a double-action-only trigger pull as its primary safety mechanism. The long, deliberate trigger pull prevents accidental discharge without requiring a separate manual safety lever to engage or disengage. This is a common and well-regarded setup for carry pistols, keeping the operation simple and the draw-to-fire sequence clean.



Reviews
There are no reviews yet.