$1,079.00
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Retay ACE 12 gauge is a fully loaded, field-ready semi-automatic shotgun that's been turning heads since it debuted at SHOT Show 2025. Built around Retay's patented Inertia Plus bolt system, a deep-bore drilled 26" barrel, and a factory-lengthened forcing cone, the ACE is engineered to cycle reliably across a wide range of loads and deliver tighter, more consistent patterns downrange. The 3.5" chamber means you're covered for everything from light dove loads to full-power magnum waterfowl rounds. At 7 lbs 4 oz with a 48" overall length, it carries well in the field without sacrificing the stability you want on follow-up shots.
The standout piece of engineering here is the Inertia Plus bolt. A common frustration with inertia-driven shotguns is the bolt getting jarred out of battery, which results in a dead click when you pull the trigger at the worst possible moment. Retay's solution is an internal torsion spring inside the rotating bolt head that actively pushes the bolt into full battery and keeps it there. The result is quieter bolt closure, virtually zero bolt rattle, and a much more dependable action under real hunting conditions. In testing across multiple independent reviews, the ACE cycled reliably with loads as light as 1 oz at 1180 fps, which is genuinely impressive for an inertia gun. The receiver is also drilled and tapped on 12 gauge models, and the gun accepts Benelli-compatible magazine tube extensions for added capacity.
The trigger group deserves a mention too. It pops out entirely with a single push-button located near the safety, with no pins to fumble with or lose. Whether you need to clean the gun in the field after a muddy day in the blind or just want quicker access for routine maintenance at home, it's a noticeably smarter setup than what most competitors offer at this price.
The 26" ventilated rib barrel is a well-rounded choice, giving you a good balance of swing weight and maneuverability whether you're walking up pheasants or setting up in a layout blind. The deep-bore drilled barrel combined with the lengthened forcing cone reduces pellet deformation as shot transitions from chamber to bore, which translates to denser, more uniform patterns at distance. The fiber optic front bead gives you a fast sight picture, and the flat rib shoots a true 50/50 point of impact right out of the box. Stock fit is adjustable via an included shim kit, the crossbolt safety is oversized and fully reversible for lefties, and the enlarged bolt handle and closer are genuinely useful when you're wearing gloves in cold weather. The AIRY recoil pad, which features an internal air pocket design, is claimed to reduce felt recoil by up to 30%, and real-world feedback backs that up, describing the recoil as straight back and noticeably softer than expected for an inertia platform. The ACE ships with six choke tubes, C, IC, M, IM, and F flush-mount tubes plus an extended waterfowl choke, using a Crio Plus-compatible thread pattern that opens up a broad aftermarket selection.
The Retay ACE is engineered to handle a broader load range than most inertia shotguns. In independent range testing, it cycled reliably with 1 oz loads at around 1180 fps, which means you can run lighter target or dove loads without worrying about short-cycling. For best results, stick to loads that meet the minimum dram equivalent specified in the owner's manual, and when in doubt, bump up the velocity slightly rather than dropping the payload weight.
The ACE series uses a Crio Plus-compatible thread pattern, which means any choke tube designed for a newer Benelli model will fit the ACE barrel. The gun ships with six chokes already, including flush-mount Cylinder, IC, Modified, IM, and Full tubes, plus an extended waterfowl choke. The Cylinder and IC chokes are rated for steel shot, but the factory IM and Full chokes are not, so use the appropriate tube when running steel or tungsten loads.
This is one of the ACE's genuinely standout features. The entire trigger group pops out of the receiver by pressing a single button near the safety, with no pins to remove or tools required. That gives you full access to the action without stripping the gun down completely. Retay recommends running dry patches through the bore after each outing and cleaning the choke tube and bolt group as needed, with a full detail strip of the recoil assembly at the end of each season.
The two guns are mechanically identical, sharing the same action, barrel, controls, and features. The only difference is the receiver profile: the ACE has a traditional rounded receiver, while the ACE-R has a slightly hump-backed receiver similar to a Browning A5. Both versions are available at the same price in the same configurations, so it really comes down to personal preference on the look.
Yes. The 12 gauge ACE receiver is drilled and tapped and is Picatinny rail compatible, so you can mount a red dot, reflex sight, or other optic without any gunsmithing. This makes the ACE a solid option for turkey hunters or anyone who prefers an optic-aided sight picture over a traditional bead.
The ACE was clearly designed with waterfowl hunters in mind. The 3.5" chamber handles everything from early-teal target loads up to full-power steel and bismuth magnum rounds. The Inertia Plus bolt system nearly eliminates out-of-battery misfires, which is a real concern when hunting from a blind or layout boat where the gun can get bumped around. The oversized controls, reversible safety, and AIRY recoil pad all add up to a package that performs well in demanding field conditions.
| UPC | 193212032164 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ACEBRBL-26 |
You must be logged in to post a review.
Reviews
There are no reviews yet.