Description
The .17 caliber bore is one of the trickiest to service. The hole is small, the rifling is fine, and using the wrong-sized tools can do more harm than good. This Shooters Choice kit takes the guesswork out of it by putting properly sized, caliber-specific gear in one package, so you're not trying to force a .22 brush through a barrel that wasn't built for it.
What the Shooters Choice .17 Cal Kit Brings to the Bench
At the heart of it is a sectioned aluminum rod with a female 5-40 threaded end and a swivel handle, which lets the tip follow the rifling instead of fighting it. You get a 2-inch .17 cal bronze phosphor bore brush for scrubbing out fouling, a 2-inch cotton bore mop for oiling and drying, a brass pierce-point jag, and a slotted tip for running patches. A bore guide is included to keep the rod centered and protect the crown and chamber, and there's a nylon all-purpose brush for hitting the receiver, bolt face, and other tight spots.
FP-10 CLP Rounds Out the .17 Caliber Cleaning Kit
Every kit ships with a 0.5 fluid ounce bottle of Shooters Choice FP-10 Lubricant Elite CLP. It cleans, lubricates, and protects in one step, so you can wipe down metal and leave a light protective film in a single pass. Also tucked in are 40 cotton cleaning patches sized at 0.75 by 0.75 inches, cut right for the .17 bore so they grip without bunching up and getting stuck.
Built for .17 Rimfire and .177 Airguns
While it's labeled for .17 cal rifles like the .17 HMR and .17 WSM, this kit also handles .177 caliber airguns and air rifles, making it a handy grab for anyone running pellet guns alongside their rimfires. The components are chosen to clean effectively without abrasives that could scratch a delicate bore, and it's compact enough to toss in a range bag for field touch-ups.
Key Specifications
- Manufacturer: Shooters Choice
- Manufacturer Part Number: SHF-SRK-17
- UPC: 027784001832
- Product Type: Cleaning Kit
- Caliber: .17 Cal / .177 Caliber
- Firearm Type: Rifle and Air Rifle / Airgun
- Rod Material: Aluminum, sectioned with swivel handle
- Thread Pattern: 5-40 Thread
- Bore Brush: 2 in. .17 cal bronze phosphor
- Bore Mop: 2 in. .17 cal cotton
- Patches: 40 count, 0.75 in. x 0.75 in. 100% cotton
- Lubricant: 0.5 fl. oz. FP-10 Lubricant Elite CLP
- Warranty: Limited 2-year warranty
What’s Included
- Aluminum sectional rod set with swivel T-handle
- 2 in. .17 cal bronze phosphor bore brush
- 2 in. .17 cal cotton bore mop
- .17 cal brass pierce-point jag
- .17 cal slotted tip
- Bore guide
- 40 count 0.75 in. x 0.75 in. 100% cotton cleaning patches
- Nylon all-purpose cleaning brush
- 0.5 fl. oz. bottle of FP-10 Lubricant Elite CLP
Frequently Asked Questions
Will this .17 cal cleaning kit work on a .17 HMR?
Yes. This kit is built for .17 caliber rifles, which covers the .17 HMR along with other .17 rimfire and centerfire chamberings. The bronze brush, jag, mop, and patches are all sized specifically for the .17 bore, so everything threads and fits the way it should.
Can I use the Shooters Choice .17 kit on a .177 air rifle?
You can. The kit is rated for both .17 cal rifles and .177 caliber airguns and air rifles, so it does double duty if you shoot pellet guns as well. Just go gentle with the rod and use the bore guide to protect the barrel.
What kind of rod comes in the kit and how does it thread?
It's a sectioned aluminum rod set with a swivel handle and a female 5-40 threaded end. The swivel lets the tip rotate and follow the rifling as it passes through the bore, which helps protect the lands and grooves in a fine .17 barrel.
Is any cleaning solvent or oil included?
Yes, each kit comes with a 0.5 fluid ounce bottle of Shooters Choice FP-10 Lubricant Elite CLP. It's an all-in-one cleaner, lubricant, and protectant, so you can loosen fouling, lubricate moving parts, and leave a rust-fighting film without needing separate products for each job.





Reviews
There are no reviews yet.