Description
There is nothing else quite like the S333 Thunderstruck. Standard Manufacturing, the Connecticut outfit behind the DP-12 double barrel shotgun, took the volley fire concept and packed it into a pocket-sized double action revolver. Every pull of the trigger drops two hammers at once, firing a pair of .22 Win Mag rounds simultaneously from stacked barrels. The eight-round cylinder gives you four trigger pulls total, and the whole cycle can be run in about three seconds. Since both rounds leave the barrels at the same instant, it operates as a legitimate double action revolver, not something exotic on paper.
What Sets the Gen II Thunderstruck Apart
This second generation model brought real refinements over the original. The barrels were lengthened to 1.5 inches and now extend from the frame, which picks up a bit of velocity and tightens things up on target. The trigger pull got smoothed out too. The frame is machined from 7075 aircraft grade aluminum with an anodized finish, paired with steel barrels and a high strength steel cylinder, so the whole gun still comes in around 18 ounces. Fixed sights and a comfortable polymer grip round out the package.
A Trigger Designed With Safety Built In
The Thunderstruck uses an oversized two-finger trigger with an articulated safety lever built right into the face. It takes a deliberate, full-length pull before the transfer bar clears the firing pins and the hammers can do their job, so a snag or bump is not going to set it off. No levers or buttons to fumble with, just a design that will not fire until you mean it to.
Feeding the S333 Thunderstruck
Standard Manufacturing shot tests and regulates every S333 at the factory, and it runs best with 40 grain loads like CCI Maxi Mag, Maxi Mag HP, and PMC Predator. Thanks to the mild-mannered .22 Magnum cartridge, recoil stays light even with two rounds going off at once, which makes this an easy gun to shoot and a genuinely fun one to bring to the range. Whether it earns a spot in your pocket or a spot in your collection as one of the most original designs in years, the Thunderstruck is a conversation starter every time it comes out of the case.
Key Specifications
- Manufacturer: Standard Manufacturing
- Model: S333 Thunderstruck Gen II
- MPN: S333-GEN-II
- UPC: 854581007015
- Caliber: .22 Winchester Magnum (.22 WMR)
- Action: Double Action Only, fires 2 rounds per trigger pull
- Capacity: 8 rounds (4 trigger pulls)
- Barrel Length: 1.5 in, stacked double barrels
- Barrel Material: Steel
- Cylinder Material: High strength steel
- Frame Material: 7075 aircraft grade aluminum, anodized
- Grips: Black polymer
- Sights: Fixed
- Safety: Articulated trigger safety with transfer bar
- Weight: 18 oz
- Overall Length: 6.9 in
What’s Included
- S333 Thunderstruck Gen II revolver
- Owner's manual
- Factory box
Frequently Asked Questions
Does the S333 Thunderstruck really fire two rounds with one trigger pull?
It does. The Thunderstruck uses two stacked barrels and dual hammers, so each pull of the trigger fires two .22 WMR rounds at the exact same moment. The eight-round cylinder gives you four total trigger pulls, and all eight rounds can be fired in roughly three seconds.
What ammo works best in the S333 Thunderstruck Gen II?
Every S333 is shot tested and regulated at the factory with 40 grain loads, specifically CCI Maxi Mag, CCI Maxi Mag HP, and PMC Predator. Sticking with those loads gives you the best accuracy since the twin barrels are regulated around them, much like a double rifle. Lighter or slower loads may not group as well.
What is different about the Gen II compared to the original Thunderstruck?
The Gen II got longer 1.5 inch barrels that extend past the frame, which adds velocity and improves accuracy over the first generation. Standard Manufacturing also refined the trigger pull and made ergonomic tweaks based on feedback from early owners. Weight and the core double barrel operating system stayed the same.
Why does the S333 Thunderstruck have such a big trigger?
The oversized trigger is designed to be pulled with two fingers, your index and middle finger together. Combined with the articulated safety lever built into the trigger face and the transfer bar system, it takes a full, deliberate pull before the gun can fire. It feels different at first, but most folks get comfortable with it after a range session.





Reviews
There are no reviews yet.