0
0

CMC Triggers AR-15/AR-10 Single Stage Component Trigger, Flat 3.5 lb, Red

UPC: 810169561584

$148.50

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

CMC has been the name in aftermarket AR fire control since 2003, and this component trigger takes everything that made their original drop-in group famous and strips away the cassette housing. You get the trigger, hammer, and disconnector as individual pieces built from the same 8620 alloy steel and S7 tool steel, machined to tight tolerances with sear surfaces finished to a 1-2 RMS. That surface quality is what gives this trigger its glass-smooth feel and an ultra-clean break with no gritty creep before the hammer drops.

Why the CMC Component Trigger Feels So Good

This one is set at 3.5 pounds from the factory, which is a sweet spot a lot of folks land on for a do-it-all AR. It is light enough to sharpen up your groups on paper but still stout enough to run hard in a tactical or defensive setup. The flat trigger shoe gives your finger a consistent place to rest, so every pull lands the same as the last, and the high-power rocket wire hammer spring keeps lock time short for reliable ignition with both commercial and mil-spec ammo.

Installing the CMC 3.5 lb Flat Component Trigger

The big win with the component design is CMC's patented assembly tool. Anybody who has swapped a mil-spec trigger the old way knows the pain of holding springs under tension while chasing a pin through misaligned holes. This tool holds everything in alignment so the group goes together without the spring-juggling headache, then installs the traditional way straight into your lower.

This is the small pin version, sized for the standard 0.154-inch pin holes found on the vast majority of mil-spec AR-15 and AR-10 receivers. If you are building out a custom lower or want CMC-level trigger performance without a drop-in cassette, this red-finished flat shoe is a clean way to get there. Trigger pull is factory pre-set and not user adjustable, so it works right out of the box.

Key Specifications

  • Manufacturer: CMC Triggers
  • Manufacturer Part Number: 51503AT-RED
  • UPC: 810169561584
  • Platform: AR-15 / AR-10
  • Trigger Type: Single Stage Component (no housing)
  • Trigger Bow: Flat
  • Pull Weight: 3.5 lb (factory pre-set, non-adjustable)
  • Pin Size: Small Pin (0.154 in)
  • Finish / Color: Red
  • Materials: 8620 Alloy Steel and S7 Tool Steel
  • Sear Surface Finish: 1-2 RMS
  • Hammer Spring: High-power rocket wire
  • Country of Origin: Made in USA (Texas)
  • Shipping Weight: 0.398 lb

What’s Included

  • CMC single stage component trigger group (trigger, hammer, disconnector)
  • CMC patented assembly tool
  • Installation instructions

Frequently Asked Questions

How is the CMC component trigger different from the drop-in trigger group?

It uses the same internals, steel, and sear geometry as CMC's classic drop-in group, but it has no cassette housing. The trigger, hammer, and disconnector install the traditional way directly into your receiver. The patented assembly tool holds everything in alignment so it goes together without the usual spring-wrestling.

Will this small pin trigger fit my AR?

This is the small pin version built for the standard 0.154-inch trigger pin holes, which covers the large majority of mil-spec AR-15 and AR-10 receivers. If you have a Colt made between 1991 and late 2009, it likely uses large 0.172-inch pins and would need CMC's large pin version instead. When in doubt, measure your pin holes before ordering.

Can I adjust the 3.5 lb pull weight?

No, CMC sets the pull weight at the factory and it is not user adjustable. The 3.5 pound setting is a popular all-around weight that works well for range work, competition, and duty or defensive use. If you want a different weight, CMC offers this trigger in other pull weights.

Is a component trigger hard to install?

Not with CMC's assembly tool. It holds the trigger, hammer, and disconnector together under spring tension so you can seat the group and slide your pins in without parts flying loose. Most people knock out the swap in around ten to twenty minutes, and it is a good idea to safety check the rifle before heading to the range.

Additional information

UPC

810169561584

Manufacturer

Manufacturer Part Number

51503AT-RED

Shipping Weight

0.398

Reviews

There are no reviews yet.

Be the first to review “CMC Triggers AR-15/AR-10 Single Stage Component Trigger, Flat 3.5 lb, Red”