Description
The Accur8 line came out of a partnership between Night Fision and Paul Markel of Student of the Gun, and the whole idea was to simplify how you line up your sights when it counts. Instead of the usual three-dot cluster, this set gives you a bright orange Perfect Dot up front with green tritium, paired with a blacked-out square rear that carries a single green tritium lamp. The rear is intentionally dimmer than the front, so your eye locks onto that front dot instead of getting pulled around trying to sort out three glowing dots in low light.
What really sets these apart is the point-of-aim, point-of-impact tuning. Most factory and aftermarket sights are zeroed around 25 yards, but the Accur8 setup was designed and tested for a defensive distance of 15 yards, holding a consistent POA/POI from close range out to 50 feet with 124 grain 9mm. Markel put in real trigger time developing these, running them hard on a personal Glock with and without a suppressor, so the design comes from actual use rather than a spec sheet.
What Makes the Perfect Dot Accur8 Sights Tick
Night Fision skips the aluminum sleeves and painted-on rings most companies rely on. Their injection-molded polymer sleeve holds the Swiss tritium vials securely and forms a ring they call the Perfect Dot, which won't flake, chip, or fade the way painted rings tend to. A domed lens over the tritium sharpens the glow so you get a crisp, defined dot instead of a fuzzy smear. Night Fision also backs the tritium with a 17-year warranty, which is longer than a lot of the competition.
Build and Fit for the Perfect Dot Accur8 Set
The bodies are CNC machined from steel and finished in black nitride to hold up against wear and corrosion. This set fits a wide swath of the Glock lineup, covering the 17, 17L, 19, 22 through 28, 31 through 35, and 37 through 39. Sight installation calls for a proper pusher tool and a bit of know-how, so a trip to a gunsmith is the smart move if you don't have the equipment on hand.
Key Specifications
- Manufacturer: Night Fision
- Manufacturer Part Number: GLK-001-015-OGZG
- UPC: 810116032594
- Series: Perfect Dot Accur8 (Student of the Gun)
- Sight Type: Tritium Night Sight Set, Front and Rear
- Front Sight: Green Tritium with Orange Perfect Dot Ring
- Rear Sight: Green Tritium Single Dot with Black Ring, Square Notch
- Front Blade Height: 0.249 in
- Rear Blade Height: 0.254 in
- Overall Height: 0.299 in Front, 0.335 in Rear
- Blade Width: 0.14 in Front
- Material: CNC Machined Steel
- Finish: Black Nitride
- Tritium Source: Swiss Tritium, Made in USA
- Zero / POA-POI: 50 ft / 15 yards
- Fits: Glock 17, 17L, 19, 22-28, 31-35, 37-39
What’s Included
- Accur8 orange Perfect Dot front sight
- Square-notch rear sight with single green tritium dot
Frequently Asked Questions
What makes the Accur8 sights different from standard three-dot night sights?
The Accur8 setup drops the two rear dots you'd see on a traditional three-dot system and runs a single dot up front over a square rear notch. This cuts down the visual clutter and processing time when you're aligning the sights, especially under stress or in low light. The front dot is also brighter than the rear, so your eye naturally locks onto it.
Do the Perfect Dot Accur8 sights use tritium, and how long do they last?
Yes, both the front and rear use Swiss tritium for self-powered glow that works without any charging or light exposure. Night Fision backs the tritium with a 17-year warranty, which is on the longer end for night sights. The daytime rings are pigmented polymer rather than paint, so they hold their color instead of chipping or fading over time.
Which Glock models does this sight set fit?
This set covers a big chunk of the Glock lineup, including the 17, 17L, 19, 22 through 28, 31 through 35, and 37 through 39. It's built for the standard Glock sight cut. If you're running a suppressor-height or optics-ready setup, double check that against your specific slide since those use different sight configurations.
Can I install these Night Fision Accur8 sights myself?
It's possible if you have a proper sight pusher tool and some experience, but Night Fision recommends professional installation. Steel sights are pressed into the dovetail under real pressure, and doing it wrong can damage the sight or the slide. Most local gunsmiths can knock this out quickly and get everything squared up.





Reviews
There are no reviews yet.