0
0

Forster Full Length Sizing Die – 6.5mm Grendel Reloading Die

UPC: 757253999130

$57.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading 6.5 Grendel and want cases that drop into your chamber without a fight, the Forster Full Length Sizing Die handles the heavy lifting. In a single stroke it works the case neck, shoulder, and body back down to spec, pops out the spent primer, and expands the neck for the next bullet. That means brass that's been through the fire a few times gets brought back to a shape your rifle likes, which matters just as much on an AR gas gun as it does in a bolt rifle.

What Sets the Forster 6.5 Grendel Sizing Die Apart

The real story here is the E-Z Out expander ball. Forster mounts it higher up in the neck area than most dies, so the ball is already engaged while the bulk of the case is still held captive in the die body. That keeps the neck aligned with the case axis on the withdrawal stroke, and the result is straighter necks and better runout numbers. If you've fought with concentricity in the past, this design is one of the reasons Forster dies have the reputation they do.

Build Quality of the Forster Full Length Die

Each die is machined from quality steel with one-piece reamers and hand polished before and after heat treating, so the internal finish is smooth and easy on your brass. Adjustment is handled with knurled knobs and a hardened decapping pin, and the Cross Bolt lock ring clamps the split ring rather than driving a screw into the die threads, so your settings hold and the threads stay clean. The expander ball runs about .001 inch under bullet diameter, which combined with normal brass springback gives you roughly .002 inch of bullet grip.

Fitting the Grendel Sizing Die to Your Press

This die uses standard 7/8-14 threads, so it drops into just about any common single stage or turret press, and of course it's right at home in a Forster Co-Ax. It ships as a single full length sizer, not a set, and it's made in the USA in Lanark, Illinois. Pair it with a seater die and you've got a complete 6.5 Grendel loading bench.

Key Specifications

  • Cartridge: 6.5mm Grendel
  • Die Type: Full Length Sizing Die
  • Manufacturer: Forster Products
  • Manufacturer Part Number: 005347
  • UPC: 757253999130
  • Thread Size: 7/8-14
  • Expander System: E-Z Out expander ball
  • Lock Ring: Cross Bolt die locking ring
  • Decapping Pin: Hardened
  • Expander Ball Size: 0.001 in under bullet diameter
  • Material: Hardened, hand-polished steel
  • Country of Origin: Made in USA
  • Shipping Weight: 0.505 lb

What’s Included

  • Forster Full Length Sizing Die (6.5mm Grendel)
  • E-Z Out expander ball assembly
  • Cross Bolt die locking ring
  • Hardened decapping pin
  • Die box
  • Instructions

Frequently Asked Questions

Does the Forster 6.5 Grendel sizing die come with a shellholder?

No, the shellholder is sold separately since it depends on your press and cartridge case head. If you're running a Forster Co-Ax press you won't need one at all, since the Co-Ax uses sliding jaws instead of a shellholder. For any other standard press, grab the correct shellholder for the 6.5 Grendel case head.

Will this die work in my press?

Yes, it uses standard 7/8-14 threads, so it fits the vast majority of single stage, turret, and progressive presses on the market. It also drops right into the Forster Co-Ax. As long as your press takes standard threaded dies, you're good to go.

Is this a full die set or just the sizing die?

This is the single full length sizing die on its own, not a two-die set. It handles neck, shoulder, and body sizing along with depriming and neck expansion. To seat bullets you'll want to add a seater die, or you can buy Forster's Bench Rest die set to get both in one package.

Is the Forster full length die a good choice for AR-15 style 6.5 Grendel rifles?

It works well for semi-autos since full length sizing brings the whole case back to spec for reliable feeding and chambering. If you run into stubborn feeding with a tight gas gun, some loaders step up to a small base die, but the standard full length sizer keeps most Grendel ARs running clean. Just remember to lube your cases lightly before sizing.

Additional information

UPC

757253999130

Manufacturer

Manufacturer Part Number

005347

Shipping Weight

0.505

Reviews

There are no reviews yet.

Be the first to review “Forster Full Length Sizing Die – 6.5mm Grendel Reloading Die”