Description
Every reloader eventually ends up with a batch of rounds they need to take apart. Maybe the charge was off, maybe a load didn't group the way you hoped, or maybe you just changed your mind partway through a project. The Forster Universal Bullet Puller handles all of that with a collet-style design that grips the bullet and lets your press do the work. The nice part about this method versus a kinetic hammer is that it's quiet, controlled, and you're not beating your components against a hard surface.
What Sets the Forster Universal Bullet Puller Apart
This is a press-mounted tool built from tough, dependable tool steel, so it's the kind of thing you buy once and keep on the bench for good. The clever bit is how it works under load: as you lower the ram and draw the bullet out, the pull actually tightens the collet's grip rather than letting it slip. That sure grip also cuts down on the chance of damaging the bullet, which means you salvage more of your components instead of tossing them.
Fitting the Forster Universal Puller to Your Press
The "Universal" name is the key here. This model threads into the Forster Co-Ax press and also works with just about any standard loading press running a 7/8-14 thread. It covers a huge range of bullet diameters, from .17 caliber all the way up to .458, so one tool follows you across most of your calibers.
A Note on Collets
Worth flagging before you check out: collets are sold separately. The puller body accepts Forster's solid steel collets, and you order them by bullet diameter for whatever calibers you're working with. Pick up the sizes that match your reloading lineup and you'll be pulling bullets cleanly in no time. Folks who've made the switch from the old impact-style pullers tend to say the same thing, that this setup is a real time saver on the bench.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: UP1010
- UPC: 757253996863
- Type: Collet-Style Press-Mounted Bullet Puller
- Press Compatibility: Forster Co-Ax and standard 7/8-14 threaded presses
- Caliber Range: .17 to .458 caliber
- Material: Tool Steel
- Collets: Sold Separately
- Shipping Weight: 0.32 lbs
What’s Included
- Forster Universal Bullet Puller body (UP1010)
Frequently Asked Questions
Does the Forster Universal Bullet Puller come with collets?
No, collets are sold separately. The puller body accepts Forster's solid steel collets, and you order them individually based on bullet diameter. Grab the sizes that match the calibers you reload most and you'll be set.
Will this puller work with my press?
The Universal model is made for the Forster Co-Ax press and also threads into any standard loading press with a 7/8-14 thread. If your press uses standard dies, this puller will fit right in. It covers bullets from .17 caliber up to .458.
How is a collet puller different from a kinetic hammer bullet puller?
A collet puller mounts in your press and uses the ram's motion to grip and draw the bullet out in a controlled, quiet way. There's no pounding on a hard surface like with a kinetic hammer, which means less mess and less spilled powder. Many reloaders find the press-mounted style faster and easier once they make the switch.
Does the Forster puller damage the bullet or brass?
The collet is designed so the pull actually tightens its grip as the bullet comes out, which keeps it from slipping. That sure grip reduces the chance of marring the bullet, so you can salvage more components and reuse them. Your brass and powder come out ready to load again too.



Reviews
There are no reviews yet.