Description
There is a lot to like about a compact bolt gun in .22 WMR, and this version of the Ruger American Rimfire gets the recipe right. The 16.1 inch cold hammer-forged barrel keeps the whole rifle at just 35 inches overall and 5.3 pounds, so it carries like a dream on long walks after squirrels, rabbits, or coyotes at closer range. The muzzle comes threaded 1/2×28 with a factory-installed thread protector, so adding a suppressor is as simple as spinning it on. Pair a can with .22 Magnum and you get a quiet, flat-shooting setup that hits noticeably harder than a .22 LR without beating up your ears or your shoulder.
Built for Accuracy, Not Just Convenience
Ruger did not cut corners on the parts that matter. The Marksman Adjustable trigger breaks clean and can be tuned between three and five pounds with a simple screw adjustment. Underneath, the Power Bedding block system locks the receiver in place and free-floats that hammer-forged barrel, which is a big reason these rifles group so well for the money. The receiver wears a factory-installed scope base, and the 60 degree bolt throw leaves plenty of knuckle room under a mounted optic. Feeding comes from the flush-mounted JMX-1 rotary magazine holding 9 rounds, and the rifle also accepts the BX-15 Magnum mag when you want more capacity in the field.
A Stock That Adapts With You
One of the smarter features on the American Rimfire is the modular stock system. This model ships with the standard length of pull, high comb module that lines your eye up nicely behind a scope, and swapping modules takes seconds since all it requires is removing the rear sling swivel stud. The black synthetic stock itself is light, weather-resistant, and textured where your hands land, so it handles wet mornings and truck rides without complaint.
Why the American Rimfire in .22 WMR Earns Its Keep
Between the tang safety that falls right under your thumb, the receiver-mounted bolt release that lets you pull the bolt without touching the trigger, and sling studs already installed, this rifle is field-ready out of the box. Add glass and go hunting.
Key Specifications
- Model Number (MPN): 8392
- UPC: 736676083923
- Caliber: .22 WMR (.22 Magnum)
- Action: Bolt Action, 60 Degree Bolt Throw
- Capacity: 9 + 1 (JMX-1 Rotary Magazine)
- Barrel Length: 16.1", Cold Hammer-Forged
- Thread Pattern: 1/2"-28 with Thread Protector
- Twist Rate: 1:14" RH, 6 Grooves
- Overall Length: 35"
- Weight: 5.3 lbs
- Length of Pull: 13.75"
- Stock: Black Synthetic, Interchangeable Modules
- Trigger: Ruger Marksman Adjustable, 3-5 lbs
- Barrel Finish: Satin Blued
- Safety: Tang-Mounted
- Sights: None, Factory-Installed Scope Base
What’s Included
- Ruger American Rimfire .22 WMR rifle
- One JMX-1 9-round rotary magazine
- Standard length of pull, high comb stock module
- Factory-installed thread protector
- Sling swivel studs (installed)
- Owner's manual
Frequently Asked Questions
What magazines does the Ruger American Rimfire in .22 WMR use?
This model feeds from the flush-mounted JMX-1 rotary magazine, which holds 9 rounds and sits even with the stock so nothing snags in the field. It also accepts the Ruger BX-15 Magnum magazine when you want 15 rounds on tap. Note that standard 10/22 magazines will not work here, since those are built for .22 LR.
Is the barrel on this Ruger American Rimfire suppressor ready?
Yes. The 16.1 inch cold hammer-forged barrel comes threaded 1/2×28, which is the most common thread pitch for rimfire suppressors, and a thread protector is installed at the factory. Just make sure your can is rated for .22 WMR, since the magnum runs hotter and faster than standard .22 LR.
Does this rifle come with sights or a scope mount?
There are no iron sights on this configuration, and it is really built to run an optic. The receiver comes with a factory-installed scope base, and the included high comb stock module lines your eye up naturally behind a scope. Most owners pair these with a 2-7x or 3-9x rimfire scope and are set for anything inside 150 yards.
Can you adjust the trigger on the American Rimfire?
You can. The Ruger Marksman Adjustable trigger lets you set the pull weight anywhere between roughly three and five pounds, and it breaks crisp right out of the box. It is one of the standout features on this rifle and a big part of why the American Rimfire line shoots so well for the price point.




Reviews
There are no reviews yet.