0
0

Lee Precision Carbide Breech Lock 3-Die Set .32 S&W Long

UPC: 734307918767

$43.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Loading the little .32 S&W Long has always been a bit of a niche corner of the reloading world, and Lee makes it about as painless as it gets. This three-die set is built around a carbide full-length sizing die, which means you can skip the messy case lube step altogether for pistol brass. Everything you need to get started ships in the box, from the sizing die to seating and expanding, plus the extras that let you actually load a round without a second shopping trip.

What the .32 S&W Long Die Set Brings to the Bench

The carbide sizing die is the star here. Because it's carbide, your sized cases come out clean and consistent with no lube residue to wipe off afterward. The Powder Thru Expanding die does double duty by flaring the case mouth while letting you drop your powder charge in the same stroke, and the bullet seating die handles both seating and crimping. It's a straightforward setup that new and experienced handloaders both appreciate.

How the Breech Lock System Speeds Things Up

Each die comes fitted with a color-coded Breech Lock bushing, which is where a lot of the convenience comes from. Once you dial a die in, the bushing locks that setting in place. You can pull the die from your press and drop it back in later without re-adjusting, so your setup stays put between sessions. The colored bushings also make it dead simple to grab the right die at a glance.

One Set, Three .32 Cartridges

Here's a genuinely useful bit of flexibility: this .32 S&W Long set will also load .32 H&R Magnum and .327 Federal Magnum. To run the longer magnum cases, you back the Powder Thru Expanding and bullet seating dies out about two turns to account for the extra case length. Just keep in mind the enclosed load data is written for .32 S&W Long, so you'll want to source proper load data for the magnum cartridges from a current manual or your powder maker. For a caliber family that can be tough to find components for, having one die set cover three cartridges is a real win.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 91876
  • UPC: 734307918767
  • Caliber: .32 S&W Long
  • Also Loads: .32 H&R Magnum, .327 Federal Magnum
  • Die Style: Carbide
  • Number of Dies: 3
  • Thread: 7/8-14 (Breech Lock bushing equipped)
  • Sizing Die: Carbide Full Length (no case lube needed)
  • Bushing Type: Color-Coded Breech Lock
  • Shipping Weight: 1.26 lbs

What’s Included

  • Carbide Full Length Sizing Die
  • Powder Thru Expanding Die
  • Bullet Seating Die
  • Color-coded Breech Lock bushings
  • Universal Shell Holder
  • Powder Dipper
  • Instructions and Load Data

Frequently Asked Questions

Do I need to lube my cases with this .32 S&W Long die set?

No, and that's one of the best parts. The full-length sizing die is carbide, so pistol brass sizes cleanly without any case lube. That saves you the messy lube-and-wipe step and speeds up your loading sessions considerably.

Can this set also load .32 H&R Magnum and .327 Federal Magnum?

Yes. Lee confirms the .32 S&W Long dies will load all three cartridges. To handle the longer magnum cases, you back the Powder Thru Expanding and bullet seating dies out about two turns. Note that the included load data covers .32 S&W Long only, so pull magnum data from a current reloading manual or your powder manufacturer.

What is the Breech Lock bushing system and do I need a special press?

Each die is fitted with a color-coded Breech Lock bushing that locks your die setting in place once it's dialed in. This lets you remove and reinstall a die without re-adjusting it every time. The bushings work with Lee presses set up for the Breech Lock system, and the color coding makes it easy to grab the right die.

Is this a complete kit or do I need to buy more parts to start?

The set covers the three main die operations plus a universal shell holder, a powder dipper, and instructions with load data. You'll still need the usual reloading essentials like a press, primers, powder, brass, and bullets, but everything specific to sizing, expanding, and seating a .32 round is right here in the box.

Additional information

UPC

734307918767

Manufacturer

Manufacturer Part Number

91876

Shipping Weight

1.26

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Carbide Breech Lock 3-Die Set .32 S&W Long”