Description
When you need a screw driven to exactly 60 in-lb and no more, the Wheeler FAT Stix Limiter handles it without any dials to fiddle with. It comes preset from the factory to a single torque value, so there's nothing to calibrate or second-guess. You just pop it onto a compatible driver, seat your bit, and turn until it slips. It's the kind of no-nonsense tool that earns a permanent spot in your range bag or on the bench.
What the FAT Stix Limiter Actually Does
This is a fixed 60 in-lb limiter that keeps you from mangling fasteners through over-tightening. It's accurate to within plus or minus 5 percent, which is tight enough for scope rings, action screws, mounts, and the rest of the small hardware that lives on a rifle. The reversible design lets you both tighten and loosen without hurting the limiter, so it isn't a one-direction tool. And while it's built with gunsmithing in mind, it works just as well on bikes, optics, drones, and any small machinery where a stripped screw would ruin your afternoon.
How the 60 in-lb Limiter Fits Your Setup
The limiter drops right onto the Wheeler FAT Stix T-Handle Driver, but it isn't picky. It'll run on any driver that accepts standard 1/4-inch bits, so you're not locked into one brand of handle. That flexibility is a big part of why folks who already own a mixed toolkit like these. Keep a few different values on hand and you've basically got a full range of preset torque options for pocket change compared to a single adjustable wrench.
Why a Preset Limiter Beats Guessing
Adjustable torque wrenches are great, but they can drift out of setting or get bumped between jobs. A preset limiter can't be knocked off value because there's no value to knock off. The 60 in-lb mark is stamped right on it, so there's zero confusion about which tool you're grabbing mid-project. For consistent, repeatable results in the field or at the workbench, this simple approach is tough to beat.
Key Specifications
- Preset Torque Value: 60 in-lb
- Accuracy: Within +/- 5%
- Drive Compatibility: 1/4-inch bits and drivers
- Design: Reversible for tightening and loosening
- Style: Preset Torque Limiter
- Finish: Black coated steel
- Manufacturer: Wheeler Engineering
- Manufacturer Part Number: 1192774
- UPC: 661120747246
- Shipping Weight: 0.353 lb
What’s Included
- Wheeler FAT Stix 60 in-lb Torque Limiter
Frequently Asked Questions
Does the FAT Stix Limiter need to be calibrated or adjusted?
Nope. It arrives preset to 60 in-lb straight from Wheeler with nothing to dial in. You just attach it to your driver, seat your bit, and go, which is what makes it so quick to use in the field or at the bench.
What drivers work with the Wheeler FAT Stix Limiter?
It's built to pair with the Wheeler FAT Stix T-Handle Driver, but it isn't limited to that. Any driver that accepts standard 1/4-inch bits will run it, so it fits nicely into most existing toolkits.
How accurate is this 60 in-lb limiter?
Wheeler rates it accurate to within plus or minus 5 percent. That's more than enough precision for scope rings, action screws, mounts, and other small firearm hardware where over-tightening causes real damage.
Can the FAT Stix Limiter be used to loosen screws too?
Yes. The reversible design lets you both tighten and loosen fasteners without damaging the limiter, so it works in both directions. That makes it more versatile than a tool locked to a single rotation.





Reviews
There are no reviews yet.