0
0

Wheeler 1-Piece Scope Mount Rem 700 LA 30mm High 20 MOA

UPC: 661120079125

$54.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Mounting a scope on a Remington 700 long action should be simple, and this Wheeler one-piece mount keeps it that way. It replaces the usual two-piece base-and-ring setup with a single machined platform, which means fewer parts to fuss with and fewer chances for things to shift under recoil. The 30mm rings are sized high, giving you plenty of clearance for larger objective bells, and the 20 MOA of built-in cant is baked right into the base so your scope has more room to dial up for longer distances.

What Sets This Wheeler 700 LA Mount Apart

The whole piece is machined from 6061 aluminum with a clean black anodized finish, and each ring uses a six-screw cap design. That extra clamping surface spreads the hold across the scope tube and keeps your optic planted where you set it. It's cut to fit the Remington Model 700 long action footprint, and the same family of mounts also works with the Savage 10/110 pattern. The high rings give a centerline height of about 1.3 inches off the receiver, which is a comfortable spot for most hunting and precision scopes with 50mm objectives.

Getting Level With the Anti-Cant Indicator

One of the handier touches here is the swing-out anti-cant level. It flips out from the mount and lets you see at a glance whether your rifle is sitting true before you take the shot, which matters a lot once you start stretching distance. You can post it up front or rear during install to get your rings squared away, then fold it out of the way. Wheeler also milled the mount to sit cleanly against the receiver so you aren't marring anything during setup.

That 20 MOA of forward slope is the real draw for long-range work. By angling the base down toward the muzzle, it gives your scope's internal elevation a head start, so you keep more usable adjustment when you're zeroed way out. For a 700 LA chambered in a flat-shooting magnum or a dedicated distance rig, that extra travel is worth having.

Key Specifications

  • Manufacturer: Wheeler Engineering
  • Manufacturer Part Number: 1108716
  • UPC: 661120079125
  • Model: Remington 700 Long Action
  • Fit: Remington 700 LA (also fits Savage 10/110 pattern)
  • Ring Size: 30mm
  • Ring Height: High
  • Centerline Height: 1.3 in
  • Built-In Cant: 20 MOA
  • Material: 6061 Aluminum
  • Finish: Black Anodized
  • Ring Design: 6-Screw Cap
  • Style: Direct Mount, One Piece
  • Length: 8.6 in

What’s Included

  • Wheeler 1-piece bolt action scope mount with integral 30mm rings and six-screw caps
  • Integrated swing-out anti-cant level

Frequently Asked Questions

Will this Wheeler mount fit my Remington 700 long action?

Yes, it's machined specifically for the Remington Model 700 long action receiver footprint. The same mount design is also compatible with the Savage 10/110 pattern. Just confirm you have a long action receiver rather than a short action, since Wheeler makes a separate SA version.

What does the 20 MOA cant do on this scope mount?

The 20 MOA is a built-in forward slope in the base that angles your scope slightly down toward the muzzle. This gives your optic's internal elevation a head start, so you keep more usable up-travel when dialing for distance. It's a real benefit if you're shooting long range and want to avoid running out of adjustment.

Is the high ring height tall enough for a 50mm objective scope?

The high version has a centerline height of about 1.3 inches off the receiver, which clears most scopes with 50mm objective bells on a Remington 700. Larger bells or added accessories like flip caps may want more room, in which case the extra-high model is worth a look. For typical hunting and precision glass, the high setup works well.

How many screws hold the scope in this mount?

Each ring uses a six-screw cap design, so there's a good amount of clamping surface gripping your scope tube. That spreads the hold evenly and helps keep the optic from shifting under recoil. Snugging the caps to even torque with a quality driver is the way to go.

Additional information

UPC

661120079125

Manufacturer

Manufacturer Part Number

1108716

Length

8.6000

Model

Shipping Weight

0.545

Style

Direct Mount

Reviews

There are no reviews yet.

Be the first to review “Wheeler 1-Piece Scope Mount Rem 700 LA 30mm High 20 MOA”