Description
Anybody who has cleaned a rifle with a wobbly three-piece rod knows the worry that comes with it. Those joints flex, the threads never sit perfectly flush, and every stroke feels like it could tap the rifling. The Tapco Double Coated Rifle Rod does away with all that by giving you a solid one-piece design that runs straight and true from breech to muzzle, with a coating that shields the bore even when the rod brushes the sides.
What Sets the Tapco TAP22077 Double Coated Rod Apart
The rod itself is heat-treated for stiffness, then centerless ground so the diameter stays consistent along its full length. From there it gets micro-polished and mirror-polished, plus that dual coating that gives the rod its name. The result is a smooth surface that glides through the bore and helps keep abrasive grit from getting pressed into your rifling. It handles anything from .22 caliber up to 6.5mm, so one rod covers a good chunk of the rifle rack.
Built for the AR Bench
With a 30-inch working length, this rod is sized right for full-length AR barrels and comes with a swivel handle that lets the rod turn with the rifling as you push a patch or brush through. That swivel is a small thing that makes a real difference, since it keeps the jag tracking the grooves instead of fighting them. The threads are cut to the standard #8-32 pattern, so your existing brushes, jags, and patch holders will thread right on without hunting for oddball adapters.
When you are done, the rod stores in its own reusable tube, which keeps dust and bench clutter off the coating between cleanings. Pair it with a bore guide and you have a setup that treats your barrel the way a good barrel deserves to be treated.
Key Specifications
- Manufacturer: Tapco
- Manufacturer Part Number: TAP22077
- UPC: 810122800743
- Working Length: 30 in
- Caliber Range: .22 Cal to 6.5mm
- Rod Type: One-piece double coated
- Rod Finish: Heat-treated, centerless ground, micro-polished, mirror-polished
- Handle: Swivel handle design
- Thread Pattern: American Standard #8-32
- Intended Use: AR-platform rifles
- Storage: Reusable protective tube
What’s Included
- Tapco 30 in Double Coated Rifle Rod with swivel handle
- Reusable storage tube
Frequently Asked Questions
Why choose a one-piece rod like the Tapco Double Coated Rifle Rod over a sectional rod?
One-piece rods avoid the joints found on screw-together rods, which can flex or leave a small step that scrapes the rifling as it passes through. This Tapco rod runs straight and consistent from end to end, and the double coating adds another layer of protection if the rod contacts the bore. Wiping it down after each pass keeps grit from building up on the surface.
What calibers does the TAP22077 rod fit?
It is rated for .22 caliber up to 6.5mm, which covers a lot of common rifle chamberings on one rod. The 30-inch working length is sized for full-length AR barrels so the rod reaches all the way through with room to spare.
Will my existing brushes and jags thread onto this rod?
Yes. The rod uses the standard American #8-32 thread pattern, so common bore brushes, jags, and patch holders will thread right on. That means you can keep using the cleaning accessories you already have on the bench.
Does the Tapco rod come with a bore guide?
No, the rod ships on its own with a reusable storage tube. Pairing it with a separate bore guide is a smart move, since a guide keeps the rod centered and helps protect the chamber throat during cleaning.



Reviews
There are no reviews yet.