Description
The .400 Legend fills the gap between the .350 Legend and the .450 Bushmaster, and this ProHunter barrel is a clean way to run it on a platform you may already own. It's a 26-inch fluted stainless barrel with a 1:16 twist, a threaded muzzle, and a thread protector in the box. Slot it onto your Encore frame and you've got a straight-wall deer rig that hits hard up close without beating you up.
What the .400 Legend Brings to the ProHunter
Winchester built the .400 Legend from the ground up as a modern straight-wall deer cartridge. A typical 215-grain load leaves the muzzle around 2,250 fps and generates roughly 2,400 ft-lbs of energy, holding onto more than 1,100 ft-lbs out at 200 yards. It's rated as effective on deer-sized game to about 300 yards, though the bullet drops off past 200, so most folks zero at 100 to 150 yards and keep shots inside that window. Recoil runs noticeably softer than the .450 Bushmaster while getting close to the same downrange punch, which makes it a great pick for younger hunters or anyone who doesn't love a bruised shoulder.
Fit and Feel of This Encore ProHunter Barrel
The ProHunter barrels are the heavy fluted, laser-engraved version of the Encore line, and the good news is they interchange with any Encore or ProHunter frame. Knock out the hinge pin, pull the old barrel and forend, and drop this one in. One thing worth knowing: rifle, shotgun, and muzzleloader barrels use different forends, and the heavy ProHunter contour needs a matching heavy-barrel forend, so make sure yours fits the profile before your first range trip.
The fluting trims weight and helps the barrel shed heat, the stainless finish shrugs off wet weather, and it ships with no sights but comes drilled and tapped so mounting a scope base is straightforward. For straight-wall country where a modern cartridge beats an old slug gun, this is a smart, versatile setup.
Key Specifications
- Manufacturer: Thompson/Center Arms
- Model: Encore ProHunter
- Manufacturer Part Number: 8260R
- UPC: 810180300797
- Caliber: .400 Legend
- Barrel Length: 26"
- Twist Rate: 1:16
- Finish: Stainless Steel, Fluted
- Muzzle: Threaded 11/16-24 with thread protector
- Sights: None, drilled and tapped for scope mount
- Fits: T/C Encore and Encore ProHunter frames
- Product Type: Replacement Rifle Barrel
What’s Included
- Thompson/Center Encore ProHunter .400 Legend 26" barrel
- Muzzle thread protector
Frequently Asked Questions
Will this .400 Legend barrel fit a standard Encore frame or only a ProHunter?
It fits both. All Encore and Encore ProHunter barrels interchange across those frames, so you can run this ProHunter barrel on a standard Encore receiver without any issue. Just pop the hinge pin and swap barrels.
Does the Encore ProHunter .400 Legend barrel come with a forend and sights?
No, the barrel ships on its own with a thread protector, no sights and no forend. Because it's a heavy fluted ProHunter contour, you'll need a forend that matches that heavier profile rather than a standard-contour one. It comes drilled and tapped, so mounting a scope base is easy.
What's the effective range of the .400 Legend on deer?
Winchester rates it as lethal on deer-sized game out to around 300 yards, but the bullet drops off quickly past 200. Most hunters zero at 100 to 150 yards and keep their shots inside 200 for the flattest, most confident hold. It carries plenty of energy for whitetails at those distances.
Can I run a suppressor or muzzle brake on this barrel?
Yes. The muzzle comes threaded 11/16-24 with a protector installed, so you can thread on a compatible brake or suppressor. Just match your device to that thread pitch.





Reviews
There are no reviews yet.