Description
The Weatherby W940705 is a one-piece scope mount and ring combo made by Talley for the Weatherby Mark V 9-Lug Magnum action. Instead of running a separate base and rings, the whole thing is machined from a single extrusion of 7000 series alloy, so the ring and base are one continuous unit. That removes the usual seam where a two-piece setup can shift or work loose, which is exactly what you want on a hard-kicking magnum. It mounts directly to the receiver using the supplied screws, fits a 1-inch scope tube, and sits at a medium ring height.
What the W940705 Fits
This set is cut specifically for the Weatherby Mark V with the 9-lug magnum action, including the popular Accumark and other magnum Mark V variants. It is not made for the Vanguard or the Model 307, so if you are running one of those rifles you will want a different mount. Getting the action match right matters here since these bolt straight to the receiver rather than clamping to a rail.
Height and Tube Fit on the W940705 Combo
Medium height on this combo measures .628 inch at the rear and .500 inch at the front, which clears most standard hunting scopes with objective bells in the 40mm to 44mm range. The 1-inch rings cover the bread-and-butter tube size you see on classic hunting optics. Lapping is not required thanks to the single-piece machined design, so the rings hold alignment right out of the package.
The matte black anodized finish keeps things low-key and matches the understated look of a Mark V nicely, and the whole set runs light at right around 2.3 ounces. For a hunter who wants a clean, dependable optic mount that stays put shot after shot, this Talley-built combo is one of the simplest ways to get a scope locked onto a Mark V and keep it there.
Key Specifications
- Manufacturer: Weatherby
- Manufacturer Part Number: W940705
- UPC: 747115446858
- Model: Scope Mount/Ring Combo
- Made By: Talley
- Fits: Weatherby Mark V 9-Lug Magnum action (including Accumark)
- Scope Tube Diameter: 1 inch
- Ring Height: Medium
- Rear Height: .628 inch
- Front Height: .500 inch
- Material: 7000 series alloy, CNC machined
- Finish: Matte Black Anodized
- Design: One-piece integrated ring and base
- Weight: Approx. 2.3 oz per set
- Mounting Screws: 6-48
What’s Included
- One-piece scope ring and base combo (sold as a pair)
- 6-48 mounting screws
- T-15 wrench
Frequently Asked Questions
What rifle does the Weatherby W940705 fit?
It is built for the Weatherby Mark V with the 9-lug magnum action, which covers the Accumark and other magnum Mark V models. It mounts directly to the receiver rather than clamping to a rail. It does not fit the Vanguard or the Model 307.
What scope tube size and ring height is the W940705?
This combo takes a 1-inch scope tube and comes in medium ring height. The rear sits at .628 inch and the front at .500 inch, which clears most standard hunting scopes with objectives in the 40mm to 44mm range.
Do I need to lap these rings?
No. Because the ring and base are machined as a single piece, alignment is built in and lapping is not required. You can mount your scope straight out of the package.
Is the Weatherby W940705 sold as a single ring or a set?
It is sold as a complete set, meaning both the front and rear one-piece mounts for the rifle. The package also includes the 6-48 mounting screws and a T-15 wrench to get it installed.



Reviews
There are no reviews yet.