Description
If you are running a big 34mm tube scope and want it to sit exactly where you set it, the Weaver Precision Tactical Rings in 34mm High give you a mounting base that does not flinch. This pair represents Weaver's top-tier ring line, machined from 7075-T6 aluminum and finished in a Type III hardcoat matte anodize that stands up to weather, recoil, and years of hard use. The high profile clears larger objective bells and is a smart match for AR-platform rifles or bolt guns where you need a touch more height for a clean cheek weld.
What Makes the Precision Tactical 34mm High Different
The heart of these rings is the heavy-duty integral cross bolt. Instead of relying on a clamping system that can shift under heavy recoil, this design locks mechanically into the rail for a true, repeatable connection. That means your point of impact holds shot after shot, whether you are stretching things out at the range or settling in behind a precision rig. Each ring cap is secured with four Torx head cap screws, which spread clamping pressure evenly across the scope tube and resist the stripping you can get with hex heads.
Mounting the Weaver 34mm High Rings
These rings drop onto any Picatinny rail or base, and they work with Weaver-style mounts too, so you are not locked into one platform. Weaver's recommended torque keeps things simple: 25 inch-pounds on the cap screws and 65 inch-pounds on the cross bolt. Stick to those numbers with a quality torque wrench and you will get a secure hold without over-crushing your scope tube.
Bottom line, this is a serious set of rings for folks who care about holding zero. Proudly made in America, the Precision Tactical 34mm High pairs a tough build with the kind of repeatable lockup that lets you trust your optic when it matters.
Key Specifications
- Manufacturer: Weaver
- Manufacturer Part Number: 99526
- UPC: 604544696493
- Tube Diameter: 34mm
- Ring Height: High
- Material: 7075-T6 Aluminum
- Finish: Matte, Type III Hardcoat Anodized
- Mount Type: Picatinny / Weaver Compatible
- Cross Bolt: Heavy-Duty Integral
- Cap Screws: Four Torx Head Per Ring
- Cap Screw Torque: 25 in-lbs
- Cross Bolt Torque: 65 in-lbs
- Country of Origin: Made in USA
What’s Included
- Pair of Weaver Precision Tactical 34mm High rings
- Torx cap screws (hardware installed)
Frequently Asked Questions
What size scope tube do the Weaver Precision Tactical 34mm High rings fit?
These rings are built specifically for scopes with a 34mm maintube, which is common on larger tactical and long-range optics. They will not fit 30mm or 1-inch tubes, so make sure your scope measures 34mm before ordering.
Do these rings work on a standard Picatinny rail?
Yes. The Precision Tactical rings are fully compatible with Picatinny rails and bases, and they also fit Weaver-style mounts. The integral cross bolt locks into the rail slots for a solid, repeatable connection.
What is the recommended torque for the Weaver Precision Tactical 34mm rings?
Weaver recommends 25 inch-pounds on the Torx cap screws and 65 inch-pounds on the cross bolt. Using a quality torque wrench and sticking to those numbers gives you a secure hold without risking damage to your scope tube.
Is the high profile the right choice for my setup?
High rings give you extra clearance for scopes with larger objective bells and help with cheek weld on AR-platform rifles. If your objective lens is smaller or you want the optic sitting lower, Weaver also offers this line in low and medium heights.





Reviews
There are no reviews yet.