0
0

Griffin Armament DUAL-LOK Stealth Flash Suppressor 30 Cal 3/4×24

UPC: 689396840027

$104.45

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Griffin Armament DUAL-LOK Minimalist Stealth Flash Suppressor is the muzzle device side of Griffin's DUAL-LOK quick-detach system, built for .30 caliber barrels with 3/4×24 threads. It works on its own as a clean, low-profile flash hider, and it also serves as the mounting interface when you pair it with a DUAL-LOK HUB mount and a compatible can. Machined from 17-4 PH stainless steel and finished in a nitrided black coating, it holds up to heat, wear, and weather without fuss.

What makes this one worth a look is how light it is. At roughly 2.4 ounces, it sits well under most competing flash suppressor mounts, which keeps weight off the end of your barrel and helps the rifle feel more responsive when you're moving between targets. The three flash suppressing tines are built with anti-resonance features to help cut down on the tuning-fork ping that plagues a lot of straight-tine designs.

How the DUAL-LOK Stealth Flash Suppressor Locks Up

The clever part is in the name. The muzzle device carries 60 machined mounting splines, and the mount adds two locking positions set 3 degrees out of phase with each other. Do the math and you land on 120 effective locking positions, which translates to a tight, repeatable suppressor mount with very little point-of-impact shift. There's no metal-on-metal ratchet to wear out, so the system stays reliable over the long haul.

Setting Up the 30 Cal Flash Suppressor

Installation is refreshingly simple. There's no timing and no shims to fiddle with, and the 3/4-inch wrench flats give you a solid grip to torque it down. Thread it on, snug it up, and you're done. Griffin has been building suppressors and muzzle gear out of Watertown, Wisconsin since 2005, and that experience shows in the fit and finish here.

Key Specifications

  • Manufacturer: Griffin Armament
  • Model: DUAL-LOK Minimalist Stealth Flash Suppressor
  • Manufacturer Part Number: DLFH22530C3424KAC
  • UPC: 689396840027
  • Caliber: .30 Cal / 7.62mm
  • Thread Pitch: 3/4×24
  • Material: 17-4 PH Stainless Steel
  • Finish: Nitrided Black
  • Weight: 2.4 oz
  • Design: 3 Anti-Resonance Flash Suppressing Tines
  • Mounting Positions: 120 effective (60 splines x 2 locking positions)
  • Wrench Flats: 3/4 inch
  • Timing/Shims: Not required
  • System: DUAL-LOK QD suppressor mounting

What’s Included

  • Griffin Armament DUAL-LOK Minimalist Stealth Flash Suppressor (.30 Cal, 3/4×24)

Frequently Asked Questions

Do I need a Griffin suppressor to use the DUAL-LOK flash suppressor?

No, it works fine as a standalone flash hider right out of the box. The DUAL-LOK feature comes into play when you add a DUAL-LOK HUB mount and a compatible suppressor, at which point the 120 locking positions give you a secure, repeatable can mount. So you can run it bare now and add the suppressor setup later.

Will this fit my 5.56 rifle or is it .30 caliber only?

This specific model is bored for .30 caliber and 7.62mm with a 3/4×24 thread pitch. Running a .30 cal bore over a 5.56 barrel is generally not ideal because you want the tightest bore that clears your projectile for the best flash and accuracy performance. Griffin offers the same DUAL-LOK design in 5.56 and other thread pitches if that's what you need.

Does the DUAL-LOK Stealth flash suppressor require timing or shims to install?

It does not. There's no timing and no shim stack to deal with, which keeps installation quick and painless. Just thread it onto your 3/4×24 barrel, torque it down using the 3/4-inch wrench flats, and you're set.

Will these straight tines create a ringing or tuning-fork sound?

Griffin built anti-resonance features into the three tines specifically to fight the pinging that some straight-tine flash hiders are known for. The design aims to keep things quiet under fire rather than ring out. Results can vary with your specific host and load, but the anti-resonance engineering is there to minimize it.

Additional information

UPC

689396840027

Manufacturer

Manufacturer Part Number

DLFH22530C3424KAC

Reviews

There are no reviews yet.

Be the first to review “Griffin Armament DUAL-LOK Stealth Flash Suppressor 30 Cal 3/4×24”

Related Products