Description
The hammer spring is one of those small parts that does a big job. It powers the hammer through every trigger cycle, giving the firing pin the strike force needed to set off a primer cleanly. When it wears out or gets weak, you start seeing light strikes and click-no-bang, and that is exactly the headache this 10-pack of White Label Armory hammer springs is built to prevent. Each one is made to Mil-Spec dimensions, so they drop into standard AR-15 and AR-10 lower assemblies without any fitting or fuss.
What the White Label Armory Hammer Spring Actually Does in Your Lower
Think of the hammer spring as the muscle behind the hammer. It seats around the trigger pin with the legs resting back on it, and when the hammer falls it slams the firing pin forward with enough energy to reliably light off both military and commercial primers. A tired spring is a common culprit behind ignition problems, especially with harder primers or certain surplus and steel-case ammo, so having fresh ones ready is smart insurance. These are standard-power springs, meaning they deliver the factory strike force you want for dependable ignition rather than a lightened pull.
Why a 10-Pack of White Label Armory Hammer Springs Makes Sense
If you build ARs, work as an armorer, or just like keeping your own rifles running, buying springs in bulk beats hunting one down when a build is halfway apart on the bench. Ten springs cover a lot of lower parts kits, rebuilds, and range-day repairs, and they store easily in a build kit or parts bin. They fit both the AR-15 and the larger AR-10 platform, so one pack works across your collection.
A quick heads up for anyone new to fire control springs: the hammer spring is the larger of the two similar-looking springs in a lower parts kit, and orientation matters during install. Get the legs seated on the trigger pin and the loop on the correct side, and it goes together clean every time.
Key Specifications
- Manufacturer: VKTR Industries / White Label Armory
- Manufacturer Part Number: WLA-PAC-1004-10
- UPC: 810155161040
- Part Type: Hammer Spring
- Platform Compatibility: AR-15 / AR-10
- Pack Quantity: 10
- Spring Power: Standard / Mil-Spec
- Specification: Mil-Spec dimensions
- Fits: Standard AR-15 and AR-10 lower fire control groups
What’s Included
- 10 Mil-Spec AR-15/AR-10 hammer springs
Frequently Asked Questions
Will this hammer spring fit both AR-15 and AR-10 rifles?
Yes. These springs are made to Mil-Spec dimensions and are designed for use in both AR-15 and AR-10 style lower assemblies. As long as your rifle uses a standard Mil-Spec fire control group, they drop right in.
Can a new hammer spring fix light primer strikes?
It often can. Light strikes and failures to fire are frequently caused by a worn or weak hammer spring that no longer delivers enough hammer-fall energy. Swapping in a fresh standard-power spring restores the full strike force needed to reliably ignite both military and commercial primers.
How do I tell the hammer spring from the trigger spring?
The two look similar in a lower parts kit, but the hammer spring is the larger of the pair. It seats around the trigger pin with the legs pointing back and resting on that pin, while the smaller trigger spring hooks under the trigger itself. Orientation matters, so it helps to reference an assembled lower before you install.
Do these springs need any special tools to install?
No special tools are required beyond basic build gear. A pin punch and a slave pin make aligning the hammer and compressing the spring much easier during install. If you have built a lower before, this is a straightforward swap.




Reviews
There are no reviews yet.