0
0

KAK Industry Rifle Length Gas Tube – Stainless Steel AR-15/AR-10

UPC: 811163030540

$16.99

55 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The gas tube is one of those small parts that gets zero attention until it doesn't work right, and then it's all you can think about. KAK Industry built this one to take that worry off the table. Machined from stainless steel and cut to rifle-length spec, it routes gas back to the bolt carrier group on ARs running a rifle-length system, which usually means barrels around 20 inches and up.

What Sets the KAK Rifle Length Gas Tube Apart

The big thing here is dimensional accuracy. This tube is made to correct tolerances, so you get clean alignment between the gas tube and the gas key with no fighting to make things engage the way they should. That matters because a tube that sits even slightly off can lead to short-stroking, sluggish cycling, or premature wear. Builders who've run KAK tubes tend to mention the same thing: they fit right the first time and line up cleanly with both the gas block and the tube opening in the upper receiver.

Where the Rifle Length Gas Tube Fits Your Build

Rifle-length gas systems run a tube that's right around 15 inches, and they're the classic setup for longer barrels chambered in the usual suspects like .223 Rem, 5.56 NATO, and .300 Blackout, along with the larger AR-10 platform calibers such as .308 Win and 7.62x51mm. The longer gas system gives you a softer shooting impulse and less felt recoil compared to shorter setups, which is part of why the rifle-length layout has such a loyal following among precision and range shooters.

Getting the KAK Gas Tube Installed

This is a straightforward replacement or fresh-build part. Keep in mind the roll pin is not included, but any standard AR gas tube roll pin will do the job. If you're comfortable with a punch, a vise, and a little patience, it's a manageable install. If not, a gunsmith can knock it out quickly. Either way, it's an affordable, American-made piece from a company that's earned a strong reputation for solid components at a fair price.

Key Specifications

  • Manufacturer: KAK Industry
  • Manufacturer Part Number: AR15-UP-173
  • UPC: 811163030540
  • Model: Gas Tube
  • Gas System Length: Rifle Length (approx. 15 inches)
  • Material: Stainless Steel
  • Finish: Silver
  • Platform: AR-15 / AR-10
  • Compatible Calibers: .223 Rem, 5.56x45mm, .300 Blackout, .308 Win, 7.62x51mm
  • Roll Pin: Not included (uses standard AR gas tube roll pin)
  • Country of Origin: USA

What’s Included

  • KAK Industry Rifle Length Gas Tube (1)

Frequently Asked Questions

What barrel length does the KAK rifle length gas tube work with?

Rifle-length gas systems are designed for barrels roughly 20 inches and longer. The tube itself measures right around 15 inches. If your barrel's gas port sits at the rifle-length position, this is the tube you want.

Does the rifle length gas tube come with a roll pin?

No, the roll pin is not included with this tube. It uses any standard AR gas tube roll pin, which is inexpensive and easy to find. Grab one if you don't already have a spare in your parts bin.

Will this KAK gas tube fit an AR-10 chambered in .308?

Yes. KAK builds this tube for AR rifle platforms running calibers like .308 Win and 7.62x51mm in addition to the standard .223 Rem, 5.56 NATO, and .300 Blackout. As long as your build uses a rifle-length gas system, it's a match.

Is the KAK rifle length gas tube hard to install?

It's a straightforward job if you're comfortable with basic AR assembly. You'll need a roll pin and a punch to seat it into the gas block, then align it with the gas key opening in the upper receiver. Builders consistently note these tubes line up cleanly, but if you'd rather not tackle it, a gunsmith can handle it fast.

Additional information

UPC

811163030540

Manufacturer

Manufacturer Part Number

AR15-UP-173

Color

Silver

Model

Product Type

Gas Tube

Reviews

There are no reviews yet.

Be the first to review “KAK Industry Rifle Length Gas Tube – Stainless Steel AR-15/AR-10”