0
0

CMMG 16.1″ 5.56 NATO Barrel Sub-Assembly 1:7 Twist Nitride

UPC: 815835016153

$194.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Building an AR-15 upper is a lot more fun when the fiddly barrel work is already handled for you. This CMMG 16.1" 5.56 NATO Barrel Sub-Assembly arrives with the M4 barrel extension pressed on and headspaced at the factory, so you're not sweating dimensional specs or chasing a go/no-go gauge. It runs a 4140 chrome moly build with a medium taper profile, a 1:7 twist rate, a 1/2-28 threaded muzzle, and a .750" gas journal, which lines up with just about every low-profile gas block on the market.

Why the Midlength Gas Runs So Smooth

This barrel uses a midlength gas port, and on a 16-inch barrel that placement is the sweet spot. Pushing the gas port a little farther down the barrel means lower pressure hitting the bolt carrier when the action unlocks, which translates to a softer recoil impulse and easier follow-up shots. It also spreads out the wear on your bolt, carrier, and springs over the long haul. Most folks who shoot a middy back to back with a carbine gun notice the difference right away.

The Salt Bath Nitride Finish on This CMMG Barrel

CMMG treats this barrel inside and out with their salt bath nitride process, sometimes called their WASP finish. Rather than building material up on the surface the way chrome lining does, nitriding converts the steel itself, so there's no dimensional buildup to mess with accuracy. You get strong corrosion and abrasion resistance, plus a bore that wipes down quick and lets you stretch out your cleaning sessions.

Putting the CMMG 16.1" Sub-Assembly to Work

The 1:7 twist stabilizes heavier 5.56 and .223 bullets well, making this a solid pick for defensive loads, range work, or a general-purpose carbine you can lean on. It's a great foundation whether you're on your first build, refreshing a tired upper, or swapping a worn barrel. Pair it with a quality bolt carrier group, gas block, and handguard and you've got a dependable core to build around.

Key Specifications

  • Manufacturer: CMMG
  • Manufacturer Part Number: 55DC70A
  • UPC: 815835016153
  • Model: Barrel Sub-Assembly
  • Caliber/Gauge: .223 REM / 5.56 NATO
  • Barrel Length: 16.10"
  • Twist Rate: 1:7"
  • Profile: Medium Taper
  • Material: 4140 Chrome Moly
  • Finish: Salt Bath Nitride (inside and out)
  • Gas System: Midlength
  • Muzzle Thread: 1/2-28 TPI
  • Gas Journal Diameter: .750"
  • Chamber: 5.56×45 NATO
  • Product Type: Rifle Barrel

What’s Included

  • CMMG 16.10" 5.56 NATO barrel
  • Factory-installed M4 barrel extension (headspaced)

Frequently Asked Questions

Does this CMMG barrel sub-assembly come headspaced and ready to install?

Yes. The M4 barrel extension is already installed and the assembly is properly headspaced from the factory. That means you can skip the barrel extension and headspacing steps and focus on the rest of your upper build. You'll still need to add your own gas block, gas tube, and handguard.

What gas block size fits this 16.1" CMMG barrel?

It has a .750" gas journal, which is the most common diameter out there, so it pairs with the vast majority of low-profile gas blocks. The gas port is set up for a midlength gas tube. Just match your gas tube length to the midlength position and you're good.

What can the 1:7 twist handle for ammo?

A 1:7 twist is on the faster end and does a great job stabilizing heavier bullets, typically in the 62 to 77 grain range, while still shooting lighter loads just fine. It's a versatile choice for both 5.56 NATO and .223 Remington. That makes it a good all-around pick for defensive ammo, range plinking, or a general-use carbine.

Why choose the midlength gas system over carbine on a 16-inch barrel?

On a 16-inch barrel, midlength gas places the port farther from the chamber, which lowers the pressure hitting your bolt carrier and gives you a smoother, less snappy recoil impulse. That also means reduced wear on your internal parts over time. Many builders consider midlength the sweet spot for a 16-inch AR-15.

Additional information

UPC

815835016153

Manufacturer

Manufacturer Part Number

55DC70A

Caliber/Gauge

.223 REM/5.56 NATO

Length

16.10"

Model

Product Type

Rifle

Shipping Weight

2.05

Reviews

There are no reviews yet.

Be the first to review “CMMG 16.1″ 5.56 NATO Barrel Sub-Assembly 1:7 Twist Nitride”