Description
Griffin built the DUAL-LOK Minimalist Stealth Flash Suppressor to do two jobs at once: knock down muzzle flash on its own, and serve as the mounting foundation for their DUAL-LOK quick-detach suppressor line. If you're running a .30 cal or 7.62 rifle with a 3/4×24 muzzle thread, this is the piece that ties everything together. The whole DUAL-LOK system is made up of two parts, the HUB mount and the muzzle device of your choosing, and this is the muzzle-device half of that equation.
How the DUAL-LOK 30/762 Mount Locks Up
The clever part is in the numbers. The device has 60 machined spline positions, and the mount uses two locking positions that sit 3 degrees out of phase with each other. Multiply that out and you get 120 effective lock points, which means your can snugs down tight no matter where the muzzle threads happen to time out. That translates to a repeatable point of impact and a mount that doesn't rattle loose after a long string of fire.
Why the Stealth Flash Hider Stays Quiet
The three-tine, open-prong design suppresses flash extremely well, and Griffin machined anti-resonance features into the tines so it won't ring or ping like a lot of straight-tined hiders do. That's the whole point of the "Stealth" name. It's cut from heat-treated 17-4 PH stainless steel and finished in a black nitride QPQ treatment for corrosion resistance and a long service life.
Light Weight, No Timing Required
At just 2.4 ounces, this is noticeably lighter than most competing flash suppressor mounts, so it keeps your barrel responsive and your overall suppressor system weight down. Installation is refreshingly simple since it requires no timing, no shims, and no crush washers to fuss with. Thread it on, torque it down, and you're ready to shoot bare or run your DUAL-LOK can over the top.
Key Specifications
- Manufacturer: Griffin Armament
- Manufacturer Part Number: DLFH30C3424
- UPC: 689396837607
- Caliber: .30 Cal / 7.62mm
- Thread Pitch: 3/4×24
- Mount Type: DUAL-LOK QD Suppressor Mount
- Muzzle Device Type: 3-Prong Flash Suppressor
- Effective Lock Positions: 120
- Material: 17-4 PH Stainless Steel
- Finish: Black Nitride QPQ
- Weight: 2.4 oz
- Timing Required: No
What’s Included
- Griffin Armament DUAL-LOK Minimalist Stealth Flash Suppressor (30/762, 3/4×24)
Frequently Asked Questions
Does the DUAL-LOK flash suppressor require timing or a crush washer?
No. This design does not require timing, shims, or crush washers, which makes installation quick and simple. You just thread it onto a 3/4×24 muzzle and torque it to spec.
Will this flash hider work as a standalone muzzle device without a suppressor?
Yes. The three-tine open-prong design suppresses flash effectively on its own, so you can run it bare at the range or in the field. When you're ready to go quiet, it doubles as the mount for Griffin's DUAL-LOK suppressor line.
What does the 120 effective lock positions figure mean for suppressor mounting?
The device has 60 machined splines and the mount has two locking positions offset by 3 degrees, which combine for 120 effective lock points. That gives you a tight, repeatable connection regardless of how the muzzle threads time out, which helps keep point of impact consistent.
Does the Stealth flash suppressor make a ringing or tuning-fork noise when fired?
Griffin machined anti-resonance features into the tines specifically to prevent the pinging or tuning-fork ring you get with many straight-tined hiders. That anti-resonance design is where the Stealth name comes from.



Reviews
There are no reviews yet.