Description
Browning calls the Mountain Pro line semi-custom, and once you handle one it makes sense. This is the top tier of the X-Bolt family, built with the kind of finishing touches you would expect from a small custom shop. The LR version stretches the barrel to 26 inches with a heavy sporter contour, spiral fluting, and a proprietary lapping process that smooths the bore from the factory. That means no drawn-out break-in routine, easier cleaning, and consistent accuracy right out of the box. In 6.5 Creedmoor with a fast twist rate, it stabilizes the heavy, high-BC bullets that make this cartridge such a favorite for long pokes on deer, antelope, and steel.
What Makes the Mountain Pro LR Different
The stock is true carbon fiber, filled with noise-dampening foam so it does not ring like a hollow drum when you bump it against brush or a shooting rail. Browning wraps the Burnt Bronze Cerakote over the stainless barrel, action, and even the exterior of the stock, so the whole rifle shrugs off weather and stays muted in the field. The barrel is free-floated and the action is bedded front and rear, which keeps things consistent shot after shot. Up front you get a threaded muzzle wearing the Recoil Hawg brake, and a thread protector comes in the box if you would rather run it clean or hang a suppressor on it.
Living With the X-Bolt Mountain Pro LR
Everything that makes the X-Bolt platform a favorite is here. The Feather Trigger breaks clean with no creep and adjusts from roughly 3 to 5 pounds. The 60 degree bolt throw clears low-mounted scopes and cycles quick, helped along by a spiral fluted bolt and bolt knob. The flush-fit rotary magazine holds four rounds and feeds straight into the chamber, and the top tang safety with bolt unlock button lets you check the chamber with the safety still on. Even with the long barrel, this rifle weighs in under 7 pounds bare, so it packs into the backcountry without complaint and settles down nicely for a longer shot when the moment comes.
Key Specifications
- Manufacturer: Browning
- Model: X-Bolt Mountain Pro Long Range
- Manufacturer Part Number: 035539282
- UPC: 023614849643
- Caliber: 6.5 Creedmoor
- Action: Bolt action, 60 degree bolt throw
- Barrel Length: 26 in, spiral fluted heavy sporter contour, lapped
- Barrel Material: Stainless steel, free-floated
- Twist Rate: 1:7 in
- Muzzle: Threaded, Recoil Hawg muzzle brake installed
- Capacity: 4 rounds, detachable rotary magazine
- Stock: Carbon fiber with accent graphics, noise-dampening foam fill
- Finish: Burnt Bronze Cerakote on barrel, action, and stock
- Trigger: Feather Trigger, adjustable approx. 3 to 5 lbs
- Overall Length: 46 in
- Length of Pull: 13.625 in
What’s Included
- Browning X-Bolt Mountain Pro LR rifle
- One detachable rotary magazine
- Recoil Hawg muzzle brake (installed)
- Muzzle thread protector
- Owner's manual and cable lock
Frequently Asked Questions
Does the X-Bolt Mountain Pro LR barrel need a break-in period?
No, and that is one of the standout perks of this rifle. Browning hand-laps the bore at the factory using a proprietary process, which smooths out the tooling marks that break-in procedures are meant to address. You get consistent accuracy from the first box of ammo, and the bore cleans up noticeably faster too.
Can I run a suppressor on the Mountain Pro LR instead of the muzzle brake?
Yes. The muzzle is threaded, so you can swap the included Recoil Hawg brake for a suppressor with a matching thread pitch or direct-thread mount. Browning also includes a thread protector in the box if you want to run the muzzle bare. In 6.5 Creedmoor, recoil is mild enough that plenty of folks skip the brake entirely.
How heavy is this rifle with the 26 inch barrel?
Even with the longer barrel, it comes in at right around 6 pounds 13 ounces bare thanks to the carbon fiber stock and the fluting on the barrel and bolt. Add a hunting weight scope and rings and most setups land in the mid 7 pound range. That is a very manageable carry weight for a rifle with this much reach.
How do I mount a scope on the Browning X-Bolt Mountain Pro LR?
The receiver is drilled and tapped for Browning's X-Lock mounting system, which uses four screws per base instead of the usual two for a rock-solid hold. You will need X-Lock compatible bases or rings, since standard X-Bolt pattern mounts are what fit this receiver. It is a sturdy setup that holds zero well even after a rough pack trip.





Reviews
There are no reviews yet.